VMI logo

You are here:   VMI Home Page  >  FAQs                 Contact Us


Don't see the answer to your question? E-mail us.

FAQ - Diodes

  • Max. storage and operating temps - New!
  • Parallel resistors and caps across diodes - New!
  • Nominal, min., and max. dimensions - New!
  • MTBF calcs for MD90FF18 type diodes - New!
  • Space level diodes
  • Mounting K25UF epoxy diode to PCB
  • Polarity testing
  • High Temp Plastic Diodes
  • I² * T
  • Series/parallel connections
  • Network compensation
  • Avalanche Capability
  • Soft/Hard Recovery
  • Matching Trr
  • and more...

FAQ - Rectifiers

  • Ratings in air, oil

FAQ - Multipliers

  • Space level standard multipliers - New!
  • MVM302 Multiplier High Temp Performance
  • 60Hz operating frequency
  • MVM series polarity

FAQ - HVP Series Power Supply

  • Positive/negative output voltage
  • Protection  systems - Over-voltage, over-current, arc/short-circuit
  • Cable and connectors
  • HVP interfaces

FAQ - LP6 HeNe Laser Power Supply- New!

FAQ - XRS Series Portable X-Ray Power Supply- New!

FAQ - Opto-Couplers

  • Turn-On/Off Time
  • Sensitivity to Light
  • Thermal Resistance
  • Power ratings
  • Gain
  • Current gain
  • Power gain
  • If through LED
  • Vf rating
  • Increase LED current
  • Operational LEDs
  • Photodiode Vrwm
  • Potting material
  • Package size
  • Custom configurations
  • Processing


diodes | rectifiers | multipliers | powersupplies | about us | sales reps | news | careers | home