* OrCAD Model Editor - Version 9.0

*$
*BeginSpec
*IF:
*JC:
*RL:
*RB: Vz=0 Iz=0 Zz=0
*RR: Trr=0 Ifwd=10.000E-3 Irev=10.000E-3 Rl=100
*EndSpec

*BeginTrace
*IF: 1,0,.4,1.2000,1,3,0,0,-1 (27)
*JC: 0,1,.1,10,1,3,0,0,-1 (27)
*RL: 0,0,1,100,1,3,0,0,-1 (27)
*RB: 0,1,100.00E-6,1,1,3,0,0,-1 (27)
*RR: 0,0,-5.0000E-9,20.000E-9,1,3,0,0,-1 (27)
*EndTrace

*BeginParam
*IS=100.00E-9 (10.000E-21,.1,0)
*N=2.3500 (.2,5,0)
*RS=2.4000 (1.0000E-6,100,0)
*IKF=0 (0,1.0000E3,0)
*XTI=3 (-100,100,0)
*EG=1.1100 (.1,5.5100,0)
*CJO=450.00E-15 (10.000E-21,1.0000E-3,0)
*M=.5 (.1,10,0)
*VJ=28.440 (.3905,10,0)
*FC=.5 (1.0000E-3,10,0)
*ISR=100.00E-12 (10.000E-21,.1,0)
*NR=2 (.5,5,0)
*BV=20.000E3 (.1,1.0000E6,0)
*IBV=100.00E-6 (1.0000E-9,10,0)
*TT=3.0000E-6 (100.00E-18,1.0000E-3,0)
*EndParam

*DEVICE=M160SG,D

* M160SG D model
* updated using Model Editor release 9.0 on 06/20/03 at 14:36
* Model Editor is an OrCAD product.
.MODEL M160SG D
+ IS=100.00E-9
+ N=2.3500
+ RS=2.4000
+ CJO=450.00E-15
+ VJ=28.440
+ ISR=100.00E-12
+ BV=20.000E3
+ IBV=100.00E-6
+ TT=3.0000E-6
*$
*BeginSpec
*IF:
*JC:
*RL:
*RB: Vz=0 Iz=0 Zz=0
*RR: Trr=0 Ifwd=10.000E-3 Irev=10.000E-3 Rl=100
*EndSpec

*BeginTrace
*IF: 1,0,.4,1.2000,1,3,0,0,-1 (27)
*JC: 0,1,.1,10,1,3,0,0,-1 (27)
*RL: 0,0,1,100,1,3,0,0,-1 (27)
*RB: 0,1,100.00E-6,1,1,3,0,0,-1 (27)
*RR: 0,0,-5.0000E-9,20.000E-9,1,3,0,0,-1 (27)
*EndTrace

*BeginParam
*IS=500.00E-9 (10.000E-21,.1,0)
*N=16 (20,25,0)
*RS=.15 (1.0000E-6,100,0)
*IKF=0 (0,1.0000E3,0)
*XTI=3 (-100,100,0)
*EG=1.1100 (.1,5.5100,0)
*CJO=68.460E-12 (10.000E-21,1.0000E-3,0)
*M=.5 (.1,10,0)
*VJ=4.2700 (.3905,10,0)
*FC=.5 (1.0000E-3,10,0)
*ISR=100.00E-12 (10.000E-21,.1,0)
*NR=2 (.5,5,0)
*BV=6.0000E3 (.1,1.0000E6,0)
*IBV=100.00E-6 (1.0000E-9,10,0)
*TT=100.000E-9 (100.00E-18,1.0000E-3,0)
*EndParam

*DEVICE=Z50FF5,D

* Z50FF5 D model
* created using Parts release 8.0 on 05/13/102 at 13:27
* Parts is a MicroSim product.
.MODEL Z50FF5 D
+ IS=500.00E-9
+ N=22.300
+ RS=.7
+ CJO=22.760E-12
+ VJ=6.4100
+ ISR=100.00E-12
+ BV=6.0000E3
+ IBV=100.00E-6
+ TT=50.000E-9
*$
*BeginSpec
*IF:
*JC:
*RL:
*RB: Vz=0 Iz=0 Zz=0
*RR: Trr=0 Ifwd=10.000E-3 Irev=10.000E-3 Rl=100
*EndSpec

*BeginTrace
*IF: 1,0,.4,1.2000,1,3,0,0,-1 (27)
*JC: 0,1,.1,10,1,3,0,0,-1 (27)
*RL: 0,0,1,100,1,3,0,0,-1 (27)
*RB: 0,1,100.00E-6,1,1,3,0,0,-1 (27)
*RR: 0,0,-5.0000E-9,20.000E-9,1,3,0,0,-1 (27)
*EndTrace

*BeginParam
*IS=500.00E-9 (10.000E-21,.1,0)
*N=35 (20,45,0)
*RS=1.5000 (1.0000E-6,100,0)
*IKF=0 (0,1.0000E3,0)
*XTI=3 (-100,100,0)
*EG=1.1100 (.1,5.5100,0)
*CJO=18.800E-12 (10.000E-21,1.0000E-3,0)
*M=.5 (.1,10,0)
*VJ=8.7000 (.3905,10,0)
*FC=.5 (1.0000E-3,10,0)
*ISR=100.00E-12 (10.000E-21,.1,0)
*NR=2 (.5,5,0)
*BV=6.0000E3 (.1,1.0000E6,0)
*IBV=100.00E-6 (1.0000E-9,10,0)
*TT=50.000E-9 (100.00E-18,1.0000E-3,0)
*EndParam

*DEVICE=Z50FF3,D

* Z50FF3 D model
* updated using Model Editor release 9.0 on 06/20/03 at 13:35
* Model Editor is an OrCAD product.
.MODEL Z50FF3 D
+ IS=500.00E-9
+ N=35
+ RS=1.5000
+ CJO=18.800E-12
+ VJ=8.7000
+ ISR=100.00E-12
+ BV=6.0000E3
+ IBV=100.00E-6
+ TT=50.000E-9
*$
*BeginSpec
*IF:
*JC:
*RL:
*RB: Vz=0 Iz=0 Zz=0
*RR: Trr=0 Ifwd=10.000E-3 Irev=10.000E-3 Rl=100
*EndSpec

*BeginTrace
*IF: 1,0,.4,1.2000,1,3,0,0,-1 (27)
*JC: 0,1,.1,10,1,3,0,0,-1 (27)
*RL: 0,0,1,100,1,3,0,0,-1 (27)
*RB: 0,1,100.00E-6,1,1,3,0,0,-1 (27)
*RR: 0,0,-5.0000E-9,20.000E-9,1,3,0,0,-1 (27)
*EndTrace

*BeginParam
*IS=500.00E-9 (10.000E-21,.1,0)
*N=35 (.2,15,0)
*RS=1.5 (1.0000E-6,100,0)
*IKF=0 (0,1.0000E3,0)
*XTI=3 (-100,100,0)
*EG=1.1100 (.1,5.5100,0)
*CJO=18.80E-12 (10.000E-21,1.0000E-3,0)
*M=.5 (.1,10,0)
*VJ=8.700 (.3905,10,0)
*FC=.5 (1.0000E-3,10,0)
*ISR=100.00E-12 (10.000E-21,.1,0)
*NR=2 (.5,5,0)
*BV=6.000E3 (.1,1.0000E6,0)
*IBV=100.00E-6 (1.0000E-9,10,0)
*TT=30.0000E-9 (100.00E-18,1.0000E-3,0)
*EndParam

*DEVICE=Z25SG,D

* Z25SG D model
* created using Parts release 8.0 on 05/13/102 at 13:36
* Parts is a MicroSim product.
.MODEL Z25SG D
+ IS=500.00E-9
+ N=2.2000
+ RS=5.0000E-3
+ CJO=33.690E-12
+ VJ=4.4700
+ ISR=100.00E-12
+ BV=3.6000E3
+ IBV=100.00E-6
+ TT=3.0000E-6
*$
*BeginSpec
*IF:
*JC:
*RL:
*RB: Vz=0 Iz=0 Zz=0
*RR: Trr=0 Ifwd=10.000E-3 Irev=10.000E-3 Rl=100
*EndSpec

*BeginTrace
*IF: 1,0,.4,1.2000,1,3,0,0,-1 (27)
*JC: 0,1,.1,10,1,3,0,0,-1 (27)
*RL: 0,0,1,100,1,3,0,0,-1 (27)
*RB: 0,1,100.00E-6,1,1,3,0,0,-1 (27)
*RR: 0,0,-5.0000E-9,20.000E-9,1,3,0,0,-1 (27)
*EndTrace

*BeginParam
*IS=500.00E-9 (10.000E-21,.1,0)
*N=2.2000 (.2,15,0)
*RS=5.000E-3 (1.0000E-6,100,0)
*IKF=0 (0,1.0000E3,0)
*XTI=3 (-100,100,0)
*EG=1.1100 (.1,5.5100,0)
*CJO=33.6900E-12 (10.000E-21,1.0000E-3,0)
*M=.5 (.1,10,0)
*VJ=4.4700 (.3905,10,0)
*FC=.5 (1.0000E-3,10,0)
*ISR=100.00E-12 (10.000E-21,.1,0)
*NR=2 (.5,5,0)
*BV=3.6000E3 (.1,1.0000E6,0)
*IBV=100.00E-6 (1.0000E-9,10,0)
*TT=3.0000E-6 (100.00E-18,1.0000E-3,0)
*EndParam

*DEVICE=Z25S,D

* Z25S D model
* created using Parts release 8.0 on 05/13/102 at 13:38
* Parts is a MicroSim product.
.MODEL Z25S D
+ IS=500.00E-9
+ N=8.5000
+ RS=40.000E-3
+ CJO=30.100E-12
+ VJ=4.9200
+ ISR=100.00E-12
+ BV=3.6000E3
+ IBV=100.00E-6
+ TT=3.0000E-6
*$
*beginspec
*if:
*jc:
*rl:
*rb: vz=0 iz=0 zz=0
*rr: trr=0 ifwd=10.000e-3 irev=10.000e-3 rl=100
*endspec

*begintrace
*if: 1,0,.4,1.2000,1,3,0,0,-1 (27)
*jc: 0,1,.1,10,1,3,0,0,-1 (27)
*rl: 0,0,1,100,1,3,0,0,-1 (27)
*rb: 0,1,100.00e-6,1,1,3,0,0,-1 (27)
*rr: 0,0,-5.0000e-9,20.000e-9,1,3,0,0,-1 (27)
*endtrace

*beginparam
*is=500.00e-9 (10.000e-21,.1,0)
*n=8.500 (13,14,0)
*rs=.04 (1.0000e-6,100,0)
*ikf=0 (0,1.0000e3,0)
*xti=3 (-100,100,0)
*eg=1.1100 (.1,5.5100,0)
*cjo=30.10e-12 (10.000e-21,1.0000e-3,0)
*m=.5 (.1,10,0)
*vj=4.9200 (4.2700,10,0)
*fc=.5 (1.0000e-3,10,0)
*isr=100.00e-12 (10.000e-21,.1,0)
*nr=2 (.5,5,0)
*bv=3.60000e3 (.1,1.0000e6,0)
*ibv=100.00e-6 (1.0000e-9,10,0)
*tt=3.0000e-6 (100.00e-18,1.0000e-3,0)
*endparam



*DEVICE=Z10SG,D

* Z10SG D model
* created using Parts release 8.0 on 05/13/102 at 13:43
* Parts is a MicroSim product.
.MODEL Z10SG D
+ IS=500.00E-9
+ N=2.0500
+ RS=15.000E-3
+ CJO=158.10E-12
+ VJ=.76
+ ISR=100.00E-12
+ BV=1.1000E3
+ IBV=100.00E-6
+ TT=3.0000E-6
*be
*$
beginspec
*if:
*jc:
*rl:
*rb: vz=0 iz=0 zz=0
*rr: trr=0 ifwd=10.000e-3 irev=10.000e-3 rl=100
*endspec

*begintrace
*if: 1,0,.4,1.2000,1,3,0,0,-1 (27)
*jc: 0,1,.1,10,1,3,0,0,-1 (27)
*rl: 0,0,1,100,1,3,0,0,-1 (27)
*rb: 0,1,100.00e-6,1,1,3,0,0,-1 (27)
*rr: 0,0,-5.0000e-9,20.000e-9,1,3,0,0,-1 (27)
*endtrace

*beginparam
*is=500.00e-9 (10.000e-21,.1,0)
*n=2.05 (.2,15,0)
*rs=.015 (1.0000e-6,100,0)
*ikf=0 (0,1.0000e3,0)
*xti=3 (-100,100,0)
*eg=1.1100 (.1,5.5100,0)
*cjo=158.10e-12 (10.000e-21,1.0000e-3,0)
*m=.5 (.1,10,0)
*vj=.76 (.3905,10,0)
*fc=.5 (1.0000e-3,10,0)
*isr=100.00e-12 (10.000e-21,.1,0)
*nr=2 (.5,5,0)
*bv=1.1000e3 (.1,1.0000e6,0)
*ibv=3.00e-6 (1.0000e-9,10,0)
*tt=5.0000e-6 (100.00e-18,1.0000e-3,0)
*endparam

*DEVICE=z10ff5,d

* z10ff5 d model
* created using parts release 8.0 on 05/13/102 at 13:45
* parts is a microsim product.
.model Z10FF5 D
+ IS=500.00E-9
+ N=4
+ RS=.13
+ CJO=260.20E-12
+ VJ=.35
+ ISR=100.00E-12
+ BV=1.1000E3
+ IBV=100.00E-6
+ TT=50.0000E-9
*$
*jc:
*rl:
*rb: vz=0 iz=0 zz=0
*rr: trr=0 ifwd=10.000e-3 irev=10.000e-3 rl=100
*endspec

*begintrace
*if: 1,0,.4,1.2000,1,3,0,0,-1 (27)
*jc: 0,1,.1,10,1,3,0,0,-1 (27)
*rl: 0,0,1,100,1,3,0,0,-1 (27)
*rb: 0,1,100.00e-6,1,1,3,0,0,-1 (27)
*rr: 0,0,-5.0000e-9,20.000e-9,1,3,0,0,-1 (27)
*endtrace

*beginparam
*is=500.00e-9 (10.000e-21,.1,0)
*n=4 (3,14,0)
*rs=.13 (1.0000e-6,100,0)
*ikf=0 (0,1.0000e3,0)
*xti=3 (-100,100,0)
*eg=1.1100 (.1,5.5100,0)
*cjo=260.20e-12 (10.000e-21,1.0000e-3,0)
*m=.5 (.1,10,0)
*vj=.3500 (4.2700,10,0)
*fc=.5 (1.0000e-3,10,0)
*isr=100.00e-12 (10.000e-21,.1,0)
*nr=2 (.5,5,0)
*bv=1.10000e3 (.1,1.0000e6,0)
*ibv=100.00e-6 (1.0000e-9,10,0)
*tt=50.0000e-9 (100.00e-18,1.0000e-3,0)
*endparam

*DEVICE=z50sg,d

* z50sg d model
* created using parts release 8.0 on 05/13/102 at 13:23
* parts is a microsim product.
.model Z50SG D
+ IS=500.00E-9
+ N=13.200
+ RS=5.0000E-3
+ CJO=20.550E-12
+ VJ=8.0900
+ ISR=100.00E-12
+ BV=6.0000E3
+ IBV=100.00E-6
+ TT=3000.000E-9

*$
*BeginSpec
*IF:
*JC:
*RL:
*RB: Vz=0 Iz=0 Zz=0
*RR: Trr=0 Ifwd=10.000E-3 Irev=10.000E-3 Rl=100
*EndSpec

*BeginTrace
*IF: 1,0,.4,1.2000,1,3,0,0,-1 (27)
*JC: 0,1,.1,10,1,3,0,0,-1 (27)
*RL: 0,0,1,100,1,3,0,0,-1 (27)
*RB: 0,1,100.00E-6,1,1,3,0,0,-1 (27)
*RR: 0,0,-5.0000E-9,20.000E-9,1,3,0,0,-1 (27)
*EndTrace

*BeginParam
*IS=500.00E-9 (10.000E-21,.1,0)
*N=13.2 (13,14,0)
*RS=.005 (1.0000E-6,100,0)
*IKF=0 (0,1.0000E3,0)
*XTI=3 (-100,100,0)
*EG=1.1100 (.1,5.5100,0)
*CJO=20.5500E-9 (10.000E-21,1.0000E-3,0)
*M=.5 (.1,10,0)
*VJ=8.0900 (4.2700,10,0)
*FC=.5 (1.0000E-3,10,0)
*ISR=100.00E-12 (10.000E-21,.1,0)
*NR=2 (.5,5,0)
*BV=6.000E3 (.1,1.0000E6,0)
*IBV=100.00E-6 (1.0000E-9,10,0)
*TT=3000E-9 (100.00E-18,1.0000E-3,0)
*EndParam

*DEVICE=Z100UF,D

* Z100UF D model
* created using Parts release 8.0 on 05/13/102 at 14:14
* Parts is a MicroSim product.
.MODEL Z100UF D
+ IS=500.00E-9
+ N=35
+ RS=.25
+ CJO=9.7500E-9
+ VJ=7.7700
+ ISR=100.00E-12
+ BV=12.000E3
+ IBV=100.00E-6
+ TT=100.00E-9
*$
:
*JC:
*RL:
*RB: Vz=0 Iz=0 Zz=0
*RR: Trr=0 Ifwd=10.000E-3 Irev=10.000E-3 Rl=100
*EndSpec

*BeginTrace
*IF: 1,0,.4,1.2000,1,3,0,0,-1 (27)
*JC: 0,1,.1,10,1,3,0,0,-1 (27)
*RL: 0,0,1,100,1,3,0,0,-1 (27)
*RB: 0,1,100.00E-6,1,1,3,0,0,-1 (27)
*RR: 0,0,-5.0000E-9,20.000E-9,1,3,0,0,-1 (27)
*EndTrace

*BeginParam
*IS=500.00E-9 (10.000E-21,.1,0)
*N=35 (20,45,0)
*RS=.25 (1.0000E-6,100,0)
*IKF=0 (0,1.0000E3,0)
*XTI=3 (-100,100,0)
*EG=1.1100 (.1,5.5100,0)
*CJO=9.75E-12 (10.000E-21,1.0000E-3,0)
*M=.5 (.1,10,0)
*VJ=7.7700 (.3905,10,0)
*FC=.5 (1.0000E-3,10,0)
*ISR=100.00E-12 (10.000E-21,.1,0)
*NR=2 (.5,5,0)
*BV=2.2000E3 (.1,1.0000E6,0)
*IBV=100.00E-6 (1.0000E-9,10,0)
*TT=100.000E-9 (100.00E-18,1.0000E-3,0)
*EndParam

*DEVICE=Z20FF3,D

* Z20FF3 D model
* created using Parts release 8.0 on 05/13/102 at 14:29
* Parts is a MicroSim product.
.MODEL Z20FF3 D
+ IS=500.00E-9
+ N=10
+ RS=.36
+ CJO=57.790E-12
+ VJ=2.16
+ ISR=100.00E-12
+ BV=2.2000E3
+ IBV=100.00E-6
+ TT=30.000E-9
*$
RL:
*RB: Vz=0 Iz=0 Zz=0
*RR: Trr=0 Ifwd=10.000E-3 Irev=10.000E-3 Rl=100
*EndSpec

*BeginTrace
*IF: 1,0,.4,1.2000,1,3,0,0,-1 (27)
*JC: 0,1,.1,10,1,3,0,0,-1 (27)
*RL: 0,0,1,100,1,3,0,0,-1 (27)
*RB: 0,1,100.00E-6,1,1,3,0,0,-1 (27)
*RR: 0,0,-5.0000E-9,20.000E-9,1,3,0,0,-1 (27)
*EndTrace

*BeginParam
*IS=1.0000E-6 (10.000E-21,.1,0)
*N=10 (15,17,0)
*RS=.36 (1.0000E-6,100,0)
*IKF=0 (0,1.0000E3,0)
*XTI=3 (-100,100,0)
*EG=1.1100 (.1,5.5100,0)
*CJO=57.790E-12 (10.000E-21,1.0000E-3,0)
*M=.5 (.1,10,0)
*VJ=4.2700 (4.2700,10,0)
*FC=.5 (1.0000E-3,10,0)
*ISR=100.00E-12 (10.000E-21,.1,0)
*NR=2 (.5,5,0)
*BV=2.2000E3 (.1,1.0000E6,0)
*IBV=30.000E-9 (1.0000E-9,10,0)
*TT=5.0000E-9 (100.00E-18,1.0000E-3,0)
*EndParam

*DEVICE=1N5623,D

* 1N5623 D model
* created using Parts release 8.0 on 05/15/102 at 14:10
* Parts is a MicroSim product.
.MODEL 1N5623 D
+ IS=2.50000E-7
+ N=2.8
+ RS=80.000E-3
+ CJO=30.650E-12
+ VJ=.69
+ ISR=100.00E-12
+ BV=1.1000E3
+ IBV=100.00E-6
+ TT=500.0000E-9
*$
ginSpec
*IF:
*JC:
*RL:
*RB: Vz=0 Iz=0 Zz=0
*RR: Trr=0 Ifwd=10.000E-3 Irev=10.000E-3 Rl=100
*EndSpec

*BeginTrace
*IF: 1,0,.4,1.2000,1,3,0,0,-1 (27)
*JC: 0,1,.1,10,1,3,0,0,-1 (27)
*RL: 0,0,1,100,1,3,0,0,-1 (27)
*RB: 0,1,100.00E-6,1,1,3,0,0,-1 (27)
*RR: 0,0,-5.0000E-9,20.000E-9,1,3,0,0,-1 (27)
*EndTrace

*BeginParam
*IS=500.00E-9 (10.000E-21,.1,0)
*N=2.8 (13,34,0)
*RS=.08 (1.0000E-6,100,0)
*IKF=0 (0,1.0000E3,0)
*XTI=3 (-100,100,0)
*EG=1.1100 (.1,5.5100,0)
*CJO=30.65E-12 (10.000E-21,1.0000E-3,0)
*M=.5 (.1,10,0)
*VJ=.69 (4.2700,10,0)
*FC=.5 (1.0000E-3,10,0)
*ISR=100.00E-12 (10.000E-21,.1,0)
*NR=2 (.5,5,0)
*BV=1.100E03 (.1,1.0000E6,0)
*IBV=100.00E-6 (1.0000E-9,10,0)
*TT=500.0000E-9 (100.00E-18,1.0000E-3,0)
*EndParam

*DEVICE=Z100S,D

* Z100S D model
* created using Parts release 8.0 on 05/15/102 at 14:15
* Parts is a MicroSim product.
.MODEL Z100S D
+ IS=500.00E-9
+ N=25
+ RS=45.000E-3
+ CJO=9.8500E-12
+ VJ=8.3100
+ ISR=100.00E-12
+ BV=12.000E3
+ IBV=100.00E-6
+ TT=3000E-9
*begin
*$
spec
*if:
*jc:
*rl:
*rb: vz=0 iz=0 zz=0
*rr: trr=0 ifwd=10.000e-3 irev=10.000e-3 rl=100
*endspec

*begintrace
*if: 1,0,.4,1.2000,1,3,0,0,-1 (27)
*jc: 0,1,.1,10,1,3,0,0,-1 (27)
*rl: 0,0,1,100,1,3,0,0,-1 (27)
*rb: 0,1,100.00e-6,1,1,3,0,0,-1 (27)
*rr: 0,0,-5.0000e-9,20.000e-9,1,3,0,0,-1 (27)
*endtrace

*beginparam
*is=500.00e-9 (10.000e-21,.1,0)
*n=25 (13,25,0)
*rs=5.0000e-3 (1.0000e-6,100,0)
*ikf=0 (0,1.0000e3,0)
*xti=3 (-100,100,0)
*eg=1.1100 (.1,5.5100,0)
*cjo=9.85e-12 (10.000e-21,1.0000e-3,0)
*m=.5 (.1,10,0)
*vj=8.310 (4.2700,10,0)
*fc=.5 (1.0000e-3,10,0)
*isr=100.00e-12 (10.000e-21,.1,0)
*nr=2 (.5,5,0)
*bv=12.0000e3 (.1,1.0000e6,0)
*ibv=100.00e-6 (1.0000e-9,10,0)
*tt=3.0000e-6 (100.00e-18,1.0000e-3,0)
*endparam


*DEVICE=Z25UF,D

* Z25UF D model
* created using Parts release 8.0 on 05/16/102 at 14:38
* Parts is a MicroSim product.
.MODEL Z25UF D
+ IS=500.00E-9
+ N=11
+ RS=.12
+ CJO=29.260E-12
+ VJ=2.5300
+ ISR=100.00E-12
+ BV=3.6000E3
+ IBV=100.00E-6
+ TT=100.00E-9
*$
*BeginSpec
*IF:
*JC:
*RL:
*RB: Vz=0 Iz=0 Zz=0
*RR: Trr=0 Ifwd=10.000E-3 Irev=10.000E-3 Rl=100
*EndSpec

*BeginTrace
*IF: 1,0,.4,1.2000,1,3,0,0,-1 (27)
*JC: 0,1,.1,10,1,3,0,0,-1 (27)
*RL: 0,0,1,100,1,3,0,0,-1 (27)
*RB: 0,1,100.00E-6,1,1,3,0,0,-1 (27)
*RR: 0,0,-5.0000E-9,20.000E-9,1,3,0,0,-1 (27)
*EndTrace

*BeginParam
*IS=500.00E-9 (10.000E-21,.1,0)
*N=7.6000 (.2,15,0)
*RS=.5 (1.0000E-6,100,0)
*IKF=0 (0,1.0000E3,0)
*XTI=3 (-100,100,0)
*EG=1.1100 (.1,5.5100,0)
*CJO=74.770E-12 (10.000E-21,1.0000E-3,0)
*M=.5 (.1,10,0)
*VJ=1.5300 (.3905,10,0)
*FC=.5 (1.0000E-3,10,0)
*ISR=100.00E-12 (10.000E-21,.1,0)
*NR=2 (.5,5,0)
*BV=1.5000E3 (.1,1.0000E6,0)
*IBV=100.00E-6 (1.0000E-9,10,0)
*TT=100.00E-9 (100.00E-18,1.0000E-3,0)
*EndParam

*DEVICE=Z10FF3,D

* Z10FF3 D model
* updated using Model Editor release 9.0 on 06/20/03 at 13:45
* Model Editor is an OrCAD product.
.MODEL Z10FF3 D
+ IS=500.00E-9
+ N=7.6000
+ RS=.5
+ CJO=74.770E-12
+ VJ=1.5300
+ ISR=100.00E-12
+ BV=1.5000E3
+ IBV=100.00E-6
+ TT=100.00E-9
*$
*BeginSpec
*IF:
*JC:
*RL:
*RB: Vz=0 Iz=0 Zz=0
*RR: Trr=0 Ifwd=10.000E-3 Irev=10.000E-3 Rl=100
*EndSpec

*BeginTrace
*IF: 1,0,.4,1.2000,1,3,0,0,-1 (27)
*JC: 0,1,.1,10,1,3,0,0,-1 (27)
*RL: 0,0,1,100,1,3,0,0,-1 (27)
*RB: 0,1,100.00E-6,1,1,3,0,0,-1 (27)
*RR: 0,0,-5.0000E-9,20.000E-9,1,3,0,0,-1 (27)
*EndTrace

*BeginParam
*IS=500.00E-9 (10.000E-21,.1,0)
*N=70 (.2,15,0)
*RS=2.6 (1.0000E-6,100,0)
*IKF=0 (0,1.0000E3,0)
*XTI=3 (-100,100,0)
*EG=1.1100 (.1,5.5100,0)
*CJO=8.490E-12 (10.000E-21,1.0000E-3,0)
*M=.5 (.1,10,0)
*VJ=20.30 (.3905,10,0)
*FC=.5 (1.0000E-3,10,0)
*ISR=100.00E-12 (10.000E-21,.1,0)
*NR=2 (.5,5,0)
*BV=12.0E3 (.1,1.0000E6,0)
*IBV=100.00E-6 (1.0000E-9,10,0)
*TT=30.000E-9 (100.00E-18,1.0000E-3,0)
*EndParam

*DEVICE=z100FF3,D

* Z100FF3 D model
* created using Parts release 8.0 on 05/16/102 at 14:52
* Parts is a MicroSim product.
.MODEL Z100FF3 D
+ IS=500.00E-9
+ N=70
+ RS=2.6
+ CJO=8.4900E-12
+ VJ=20.30
+ ISR=100.00E-12
+ BV=12.000E3
+ IBV=100.00E-6
+ TT=30.0000E-9
*$
*BeginSpec
*IF:
*JC:
*RL:
*RB: Vz=0 Iz=0 Zz=0
*RR: Trr=0 Ifwd=10.000E-3 Irev=10.000E-3 Rl=100
*EndSpec

*BeginTrace
*IF: 1,0,.4,1.2000,1,3,0,0,-1 (27)
*JC: 0,1,.1,10,1,3,0,0,-1 (27)
*RL: 0,0,1,100,1,3,0,0,-1 (27)
*RB: 0,1,100.00E-6,1,1,3,0,0,-1 (27)
*RR: 0,0,-5.0000E-9,20.000E-9,1,3,0,0,-1 (27)
*EndTrace

*BeginParam
*IS=500.00E-9 (10.000E-21,.1,0)
*N=70 (.2,75,0)
*RS=.5 (1.0000E-6,100,0)
*IKF=0 (0,1.0000E3,0)
*XTI=3 (-100,100,0)
*EG=1.1100 (.1,5.5100,0)
*CJO=8.490E-12 (10.000E-21,1.0000E-3,0)
*M=.5 (.1,10,0)
*VJ=20.30 (.3905,30,0)
*FC=.5 (1.0000E-3,10,0)
*ISR=100.00E-12 (10.000E-21,.1,0)
*NR=2 (.5,5,0)
*BV=12.0E3 (.1,1.0000E6,0)
*IBV=100.00E-6 (1.0000E-9,10,0)
*TT=30.000E-9 (100.00E-18,1.0000E-3,0)
*EndParam

*DEVICE=z150UFG,D

* Z150UFG D model
* created using Parts release 8.0 on 05/16/102 at 14:52
* Parts is a MicroSim product.
.MODEL Z150UFG D
+ IS=500.00E-9
+ N=3
+ RS=1.6
+ CJO=5.9900E-12
+ VJ=21.33
+ ISR=100.00E-12
+ BV=18.000E3
+ IBV=100.00E-6
+ TT=100.0000E-9
*$
*BeginSpec
*IF:
*JC:
*RL:
*RB: Vz=0 Iz=0 Zz=0
*RR: Trr=0 Ifwd=10.000E-3 Irev=10.000E-3 Rl=100
*EndSpec

*BeginTrace
*IF: 1,0,.4,1.2000,1,3,0,0,-1 (27)
*JC: 0,1,.1,10,1,3,0,0,-1 (27)
*RL: 0,0,1,100,1,3,0,0,-1 (27)
*RB: 0,1,100.00E-6,1,1,3,0,0,-1 (27)
*RR: 0,0,-5.0000E-9,20.000E-9,1,3,0,0,-1 (27)
*EndTrace

*BeginParam
*IS=500.00E-9 (10.000E-21,.1,0)
*N=3 (.2,15,0)
*RS=1.6 (1.0000E-6,100,0)
*IKF=0 (0,1.0000E3,0)
*XTI=3 (-100,100,0)
*EG=1.1100 (.1,5.5100,0)
*CJO=5.990E-12 (10.000E-21,1.0000E-3,0)
*M=.5 (.1,10,0)
*VJ=21.33 (.3905,10,0)
*FC=.5 (1.0000E-3,10,0)
*ISR=100.00E-12 (10.000E-21,.1,0)
*NR=2 (.5,5,0)
*BV=1.8000E3 (.1,1.0000E6,0)
*IBV=100.00E-6 (1.0000E-9,10,0)
*TT=100.000E-9 (100.00E-18,1.0000E-3,0)
*EndParam

*DEVICE=z100sg, D
* created using Parts release 8.0 on 05/16/102 at 14:52
* Parts is a MicroSim product.
.MODEL Z100SG D
+ IS=500.00E-9
+ N=26
+ RS=.005
+ CJO=10.4100E-12
+ VJ=13.55
+ ISR=100.00E-12
+ BV=12.000E3
+ IBV=100.00E-6
+ TT=3000.0000E-9
*$
*BeginSpec
*IF:
*JC:
*RL:
*RB: Vz=0 Iz=0 Zz=0
*RR: Trr=0 Ifwd=10.000E-3 Irev=10.000E-3 Rl=100
*EndSpec

*BeginTrace
*IF: 1,0,.4,1.2000,1,3,0,0,-1 (27)
*JC: 0,1,.1,10,1,3,0,0,-1 (27)
*RL: 0,0,1,100,1,3,0,0,-1 (27)
*RB: 0,1,100.00E-6,1,1,3,0,0,-1 (27)
*RR: 0,0,-5.0000E-9,20.000E-9,1,3,0,0,-1 (27)
*EndTrace

*BeginParam
*IS=500.00E-9 (10.000E-21,.1,0)
*N=38 (.2,45,0)
*RS=2.2(1.0000E-6,100,0)
*IKF=0 (0,1.0000E3,0)
*XTI=3 (-100,100,0)
*EG=1.1100 (.1,5.5100,0)
*CJO=3.10E-12 (10.000E-21,1.0000E-3,0)
*M=.5 (.1,10,0)
*VJ=8.66 (.3905,10,0)
*FC=.5 (1.0000E-3,10,0)
*ISR=100.00E-12 (10.000E-21,.1,0)
*NR=2 (.5,5,0)
*BV=6.000E3 (.1,1.0000E6,0)
*IBV=100.00E-6 (1.0000E-9,10,0)
*TT=30.000E-9 (100.00E-18,1.0000E-3,0)
*EndParam


*DEVICE=x25sg, D
* created using Parts release 8.0 on 05/16/102 at 14:52
* Parts is a MicroSim product.
.MODEL X25SG D
+ IS=500.00E-9
+ N=2.35
+ RS=.3
+ CJO=6.500E-12
+ VJ=4.25
+ ISR=100.00E-12
+ BV=3.6000E3
+ IBV=100.00E-6
+ TT=3000.0000E-9
*$
*BeginSpec
*IF:
*JC:
*RL:
*RB: Vz=0 Iz=0 Zz=0
*RR: Trr=0 Ifwd=10.000E-3 Irev=10.000E-3 Rl=100
*EndSpec

*BeginTrace
*IF: 1,0,.4,1.2000,1,3,0,0,-1 (27)
*JC: 0,1,.1,10,1,3,0,0,-1 (27)
*RL: 0,0,1,100,1,3,0,0,-1 (27)
*RB: 0,1,100.00E-6,1,1,3,0,0,-1 (27)
*RR: 0,0,-5.0000E-9,20.000E-9,1,3,0,0,-1 (27)
*EndTrace

*BeginParam
*IS=500.00E-9 (10.000E-21,.1,0)
*N=2.35 (.2,45,0)
*RS=.3(1.0000E-6,100,0)
*IKF=0 (0,1.0000E3,0)
*XTI=3 (-100,100,0)
*EG=1.1100 (.1,5.5100,0)
*CJO=6.50E-12 (10.000E-21,1.0000E-3,0)
*M=.5 (.1,10,0)
*VJ=4.25 (.3905,10,0)
*FC=.5 (1.0000E-3,10,0)
*ISR=100.00E-12 (10.000E-21,.1,0)
*NR=2 (.5,5,0)
*BV=3.6000E3 (.1,1.0000E6,0)
*IBV=100.00E-6 (1.0000E-9,10,0)
*TT=3000.000E-9 (100.00E-18,1.0000E-3,0)
*EndParam


*DEVICE=x20ff3, D
* created using Parts release 8.0 on 05/16/102 at 14:52
* Parts is a MicroSim product.
.MODEL X20FF3 D
+ IS=2.50E-7
+ N=9
+ RS=.8
+ CJO=8.4300E-12
+ VJ=3.11
+ ISR=100.00E-12
+ BV=2.2000E3
+ IBV=100.00E-6
+ TT=30.0000E-9
*$
*BeginSpec
*IF:
*JC:
*RL:
*RB: Vz=0 Iz=0 Zz=0
*RR: Trr=0 Ifwd=10.000E-3 Irev=10.000E-3 Rl=100
*EndSpec

*BeginTrace
*IF: 1,0,.4,1.2000,1,3,0,0,-1 (27)
*JC: 0,1,.1,10,1,3,0,0,-1 (27)
*RL: 0,0,1,100,1,3,0,0,-1 (27)
*RB: 0,1,100.00E-6,1,1,3,0,0,-1 (27)
*RR: 0,0,-5.0000E-9,20.000E-9,1,3,0,0,-1 (27)
*EndTrace

*BeginParam
*IS=500.00E-9 (10.000E-21,.1,0)
*N=9 (.2,45,0)
*RS=.8(1.0000E-6,100,0)
*IKF=0 (0,1.0000E3,0)
*XTI=3 (-100,100,0)
*EG=1.1100 (.1,5.5100,0)
*CJO=8.430E-12 (10.000E-21,1.0000E-3,0)
*M=.5 (.1,10,0)
*VJ=3.11 (.3905,10,0)
*FC=.5 (1.0000E-3,10,0)
*ISR=100.00E-12 (10.000E-21,.1,0)
*NR=2 (.5,5,0)
*BV=2.2000E3 (.1,1.0000E6,0)
*IBV=100.00E-6 (1.0000E-9,10,0)
*TT=30.000E-9 (100.00E-18,1.0000E-3,0)
*EndParam


*DEVICE=x200ufg, D
* created using Parts release 8.0 on 05/16/102 at 14:52
* Parts is a MicroSim product.
.MODEL X200UFG D
+ IS=2.500E-7
+ N=3
+ RS=9
+ CJO=1.0100E-12
+ VJ=23.44
+ ISR=100.00E-12
+ BV=22.000E3
+ IBV=100.00E-6
+ TT=100.0000E-9
*$
*BeginSpec
*IF:
*JC:
*RL:
*RB: Vz=0 Iz=0 Zz=0
*RR: Trr=0 Ifwd=10.000E-3 Irev=10.000E-3 Rl=100
*EndSpec

*BeginTrace
*IF: 1,0,.4,1.2000,1,3,0,0,-1 (27)
*JC: 0,1,.1,10,1,3,0,0,-1 (27)
*RL: 0,0,1,100,1,3,0,0,-1 (27)
*RB: 0,1,100.00E-6,1,1,3,0,0,-1 (27)
*RR: 0,0,-5.0000E-9,20.000E-9,1,3,0,0,-1 (27)
*EndTrace

*BeginParam
*IS=250.00E-9 (10.000E-21,.1,0)
*N=2.8000 (.2,45,0)
*RS=8 (1.0000E-6,100,0)
*IKF=0 (0,1.0000E3,0)
*XTI=3 (-100,100,0)
*EG=1.1100 (.1,5.5100,0)
*CJO=1.2300E-12 (10.000E-21,1.0000E-3,0)
*M=.5 (.1,10,0)
*VJ=19.170 (.3905,10,0)
*FC=.5 (1.0000E-3,10,0)
*ISR=100.00E-12 (10.000E-21,.1,0)
*NR=2 (.5,5,0)
*BV=18.000E3 (.1,1.0000E6,0)
*IBV=100.00E-6 (1.0000E-9,10,0)
*TT=30.000E-9 (100.00E-18,1.0000E-3,0)
*EndParam

*DEVICE=X150UFG,D

* X150UFG D model
* updated using Model Editor release 9.0 on 06/20/03 at 13:55
* Model Editor is an OrCAD product.
.MODEL X150UFG D
+ IS=250.00E-9
+ N=2.8000
+ RS=8
+ CJO=1.2300E-12
+ VJ=19.170
+ ISR=100.00E-12
+ BV=18.000E3
+ IBV=100.00E-6
+ TT=30.000E-9
*$
*BeginSpec
*IF:
*JC:
*RL:
*RB: Vz=0 Iz=0 Zz=0
*RR: Trr=0 Ifwd=10.000E-3 Irev=10.000E-3 Rl=100
*EndSpec

*BeginTrace
*IF: 1,0,.4,1.2000,1,3,0,0,-1 (27)
*JC: 0,1,.1,10,1,3,0,0,-1 (27)
*RL: 0,0,1,100,1,3,0,0,-1 (27)
*RB: 0,1,100.00E-6,1,1,3,0,0,-1 (27)
*RR: 0,0,-5.0000E-9,20.000E-9,1,3,0,0,-1 (27)
*EndTrace

*BeginParam
*IS=25.000E-6 (10.000E-21,.1,0)
*N=2.3500 (.2,10,0)
*RS=.98 (1.0000E-6,100,0)
*IKF=0 (0,1.0000E3,0)
*XTI=3 (-100,100,0)
*EG=1.1100 (.1,5.5100,0)
*CJO=1.1900E-12 (10.000E-21,1.0000E-3,0)
*M=.5 (.1,10,0)
*VJ=26.180 (.3905,10,0)
*FC=.5 (1.0000E-3,10,0)
*ISR=100.00E-12 (10.000E-21,.1,0)
*NR=2 (.5,5,0)
*BV=17.000E3 (.1,1.0000E6,0)
*IBV=100.00E-6 (1.0000E-9,10,0)
*TT=100.00E-9 (100.00E-18,1.0000E-3,0)
*EndParam

*DEVICE=X150SG,D

* X150SG D model
* updated using Model Editor release 9.0 on 06/20/03 at 13:57
* Model Editor is an OrCAD product.
.MODEL X150SG D
+ IS=25.000E-6
+ N=2.3500
+ RS=.98
+ CJO=1.1900E-12
+ VJ=26.180
+ ISR=100.00E-12
+ BV=17.000E3
+ IBV=100.00E-6
+ TT=100.00E-9
*$
*BeginSpec
*IF:
*JC:
*RL:
*RB: Vz=0 Iz=0 Zz=0
*RR: Trr=0 Ifwd=10.000E-3 Irev=10.000E-3 Rl=100
*EndSpec

*BeginTrace
*IF: 1,0,.4,1.2000,1,3,0,0,-1 (27)
*JC: 0,1,.1,10,1,3,0,0,-1 (27)
*RL: 0,0,1,100,1,3,0,0,-1 (27)
*RB: 0,1,100.00E-6,1,1,3,0,0,-1 (27)
*RR: 0,0,-5.0000E-9,20.000E-9,1,3,0,0,-1 (27)
*EndTrace

*BeginParam
*IS=250.00E-9 (10.000E-21,.1,0)
*N=90 (.2,90,0)
*RS=.8 (1.0000E-6,100,0)
*IKF=0 (0,1.0000E3,0)
*XTI=3 (-100,100,0)
*EG=1.1100 (.1,5.5100,0)
*CJO=980.00E-15 (10.000E-21,1.0000E-3,0)
*M=.5 (.1,10,0)
*VJ=16.830 (.3905,10,0)
*FC=.5 (1.0000E-3,10,0)
*ISR=100.00E-12 (10.000E-21,.1,0)
*NR=2 (.5,5,0)
*BV=17.000E3 (.1,1.0000E6,0)
*IBV=100.00E-6 (1.0000E-9,10,0)
*TT=30.000E-9 (100.00E-18,1.0000E-3,0)
*EndParam

*DEVICE=X150FF3,D

* X150FF3 D model
* updated using Model Editor release 9.0 on 06/20/03 at 13:59
* Model Editor is an OrCAD product.
.MODEL X150FF3 D
+ IS=250.00E-9
+ N=90
+ RS=.8
+ CJO=980.00E-15
+ VJ=16.830
+ ISR=100.00E-12
+ BV=17.000E3
+ IBV=100.00E-6
+ TT=30.000E-9
*$
*BeginSpec
*IF:
*JC:
*RL:
*RB: Vz=0 Iz=0 Zz=0
*RR: Trr=0 Ifwd=10.000E-3 Irev=10.000E-3 Rl=100
*EndSpec

*BeginTrace
*IF: 1,0,.4,1.2000,1,3,0,0,-1 (27)
*JC: 0,1,.1,10,1,3,0,0,-1 (27)
*RL: 0,0,1,100,1,3,0,0,-1 (27)
*RB: 0,1,100.00E-6,1,1,3,0,0,-1 (27)
*RR: 0,0,-5.0000E-9,20.000E-9,1,3,0,0,-1 (27)
*EndTrace

*BeginParam
*IS=250.00E-9 (10.000E-21,.1,0)
*N=5 (.2,5,0)
*RS=.25 (1.0000E-6,100,0)
*IKF=0 (0,1.0000E3,0)
*XTI=3 (-100,100,0)
*EG=1.1100 (.1,5.5100,0)
*CJO=66.030E-12 (10.000E-21,1.0000E-3,0)
*M=.5 (.1,10,0)
*VJ=.27 (.3905,10,0)
*FC=.5 (1.0000E-3,10,0)
*ISR=100.00E-12 (10.000E-21,.1,0)
*NR=2 (.5,5,0)
*BV=1.1000E3 (.1,1.0000E6,0)
*IBV=100.00E-6 (1.0000E-9,10,0)
*TT=50.000E-9 (100.00E-18,1.0000E-3,0)
*EndParam

*DEVICE=X10FF5,D

* X10FF5 D model
* updated using Model Editor release 9.0 on 06/20/03 at 14:03
* Model Editor is an OrCAD product.
.MODEL X10FF5 D
+ IS=250.00E-9
+ N=5
+ RS=.25
+ CJO=66.030E-12
+ VJ=.27
+ ISR=100.00E-12
+ BV=1.1000E3
+ IBV=100.00E-6
+ TT=50.000E-9
*$
*BeginSpec
*IF:
*JC:
*RL:
*RB: Vz=0 Iz=0 Zz=0
*RR: Trr=0 Ifwd=10.000E-3 Irev=10.000E-3 Rl=100
*EndSpec

*BeginTrace
*IF: 1,0,.4,1.2000,1,3,0,0,-1 (27)
*JC: 0,1,.1,10,1,3,0,0,-1 (27)
*RL: 0,0,1,100,1,3,0,0,-1 (27)
*RB: 0,1,100.00E-6,1,1,3,0,0,-1 (27)
*RR: 0,0,-5.0000E-9,20.000E-9,1,3,0,0,-1 (27)
*EndTrace

*BeginParam
*IS=250.00E-9 (10.000E-21,.1,0)
*N=11 (.2,15,0)
*RS=.383 (1.0000E-6,100,0)
*IKF=0 (0,1.0000E3,0)
*XTI=3 (-100,100,0)
*EG=1.1100 (.1,5.5100,0)
*CJO=16.470E-12 (10.000E-21,1.0000E-3,0)
*M=.5 (.1,10,0)
*VJ=2.2600 (.3905,10,0)
*FC=.5 (1.0000E-3,10,0)
*ISR=100.00E-12 (10.000E-21,.1,0)
*NR=2 (.5,5,0)
*BV=1.1000E3 (.1,1.0000E6,0)
*IBV=100.00E-6 (1.0000E-9,10,0)
*TT=30.000E-9 (100.00E-18,1.0000E-3,0)
*EndParam

*DEVICE=X10FF3,D

* X10FF3 D model
* updated using Model Editor release 9.0 on 06/20/03 at 14:03
* Model Editor is an OrCAD product.
.MODEL X10FF3 D
+ IS=250.00E-9
+ N=11
+ RS=.383
+ CJO=16.470E-12
+ VJ=2.2600
+ ISR=100.00E-12
+ BV=1.1000E3
+ IBV=100.00E-6
+ TT=30.000E-9
*$
*BeginSpec
*IF:
*JC:
*RL:
*RB: Vz=0 Iz=0 Zz=0
*RR: Trr=0 Ifwd=10.000E-3 Irev=10.000E-3 Rl=100
*EndSpec

*BeginTrace
*IF: 1,0,.4,1.2000,1,3,0,0,-1 (27)
*JC: 0,1,.1,10,1,3,0,0,-1 (27)
*RL: 0,0,1,100,1,3,0,0,-1 (27)
*RB: 0,1,100.00E-6,1,1,3,0,0,-1 (27)
*RR: 0,0,-5.0000E-9,20.000E-9,1,3,0,0,-1 (27)
*EndTrace

*BeginParam
*IS=250.00E-9 (10.000E-21,.1,0)
*N=70 (.2,75,0)
*RS=6 (1.0000E-6,100,0)
*IKF=0 (0,1.0000E3,0)
*XTI=3 (-100,100,0)
*EG=1.1100 (.1,5.5100,0)
*CJO=1.3800E-12 (10.000E-21,1.0000E-3,0)
*M=.5 (.1,10,0)
*VJ=16.790 (.3905,10,0)
*FC=.5 (1.0000E-3,10,0)
*ISR=100.00E-12 (10.000E-21,.1,0)
*NR=2 (.5,5,0)
*BV=12.000E3 (.1,1.0000E6,0)
*IBV=100.00E-6 (1.0000E-9,10,0)
*TT=30.000E-9 (100.00E-18,1.0000E-3,0)
*EndParam

*DEVICE=X100FF3,D

* X100FF3 D model
* updated using Model Editor release 9.0 on 06/20/03 at 14:05
* Model Editor is an OrCAD product.
.MODEL X100FF3 D
+ IS=250.00E-9
+ N=70
+ RS=6
+ CJO=1.3800E-12
+ VJ=16.790
+ ISR=100.00E-12
+ BV=12.000E3
+ IBV=100.00E-6
+ TT=30.000E-9
*$
*BeginSpec
*IF:
*JC:
*RL:
*RB: Vz=0 Iz=0 Zz=0
*RR: Trr=0 Ifwd=10.000E-3 Irev=10.000E-3 Rl=100
*EndSpec

*BeginTrace
*IF: 1,0,.4,1.2000,1,3,0,0,-1 (27)
*JC: 0,1,.1,10,1,3,0,0,-1 (27)
*RL: 0,0,1,100,1,3,0,0,-1 (27)
*RB: 0,1,100.00E-6,1,1,3,0,0,-1 (27)
*RR: 0,0,-5.0000E-9,20.000E-9,1,3,0,0,-1 (27)
*EndTrace

*BeginParam
*IS=250.00E-9 (10.000E-21,.1,0)
*N=2.3500 (.2,5,0)
*RS=.9 (1.0000E-6,100,0)
*IKF=0 (0,1.0000E3,0)
*XTI=3 (-100,100,0)
*EG=1.1100 (.1,5.5100,0)
*CJO=1.5000E-12 (10.000E-21,1.0000E-3,0)
*M=.5 (.1,10,0)
*VJ=19.790 (.3905,10,0)
*FC=.5 (1.0000E-3,10,0)
*ISR=100.00E-12 (10.000E-21,.1,0)
*NR=2 (.5,5,0)
*BV=12.000E3 (.1,1.0000E6,0)
*IBV=100.00E-6 (1.0000E-9,10,0)
*TT=3.0000E-6 (100.00E-18,1.0000E-3,0)
*EndParam

*DEVICE=X100SG,D

* X100SG D model
* updated using Model Editor release 9.0 on 06/20/03 at 14:06
* Model Editor is an OrCAD product.
.MODEL X100SG D
+ IS=250.00E-9
+ N=2.3500
+ RS=.9
+ CJO=1.5000E-12
+ VJ=19.790
+ ISR=100.00E-12
+ BV=12.000E3
+ IBV=100.00E-6
+ TT=3.0000E-6
*$
*BeginSpec
*IF:
*JC:
*RL:
*RB: Vz=0 Iz=0 Zz=0
*RR: Trr=0 Ifwd=10.000E-3 Irev=10.000E-3 Rl=100
*EndSpec

*BeginTrace
*IF: 1,0,.4,1.2000,1,3,0,0,-1 (27)
*JC: 0,1,.1,10,1,3,0,0,-1 (27)
*RL: 0,0,1,100,1,3,0,0,-1 (27)
*RB: 0,1,100.00E-6,1,1,3,0,0,-1 (27)
*RR: 0,0,-5.0000E-9,20.000E-9,1,3,0,0,-1 (27)
*EndTrace

*BeginParam
*IS=100.00E-9 (10.000E-21,.1,0)
*N=14.400 (.2,15,0)
*RS=1 (1.0000E-6,100,0)
*IKF=0 (0,1.0000E3,0)
*XTI=3 (-100,100,0)
*EG=1.1100 (.1,5.5100,0)
*CJO=1.4500E-12 (10.000E-21,1.0000E-3,0)
*M=.5 (.1,10,0)
*VJ=7.3100 (.3905,10,0)
*FC=.5 (1.0000E-3,10,0)
*ISR=100.00E-12 (10.000E-21,.1,0)
*NR=2 (.5,5,0)
*BV=6.0000E3 (.1,1.0000E6,0)
*IBV=100.00E-6 (1.0000E-9,10,0)
*TT=3.0000E-6 (100.00E-18,1.0000E-3,0)
*EndParam

*DEVICE=M50SG,D

* M50SG D model
* updated using Model Editor release 9.0 on 06/20/03 at 14:06
* Model Editor is an OrCAD product.
.MODEL M50SG D
+ IS=100.00E-9
+ N=14.400
+ RS=1
+ CJO=1.4500E-12
+ VJ=7.3100
+ ISR=100.00E-12
+ BV=6.0000E3
+ IBV=100.00E-6
+ TT=3.0000E-6
*$
*BeginSpec
*IF:
*JC:
*RL:
*RB: Vz=0 Iz=0 Zz=0
*RR: Trr=0 Ifwd=10.000E-3 Irev=10.000E-3 Rl=100
*EndSpec

*BeginTrace
*IF: 1,0,.4,1.2000,1,3,0,0,-1 (27)
*JC: 0,1,.1,10,1,3,0,0,-1 (27)
*RL: 0,0,1,100,1,3,0,0,-1 (27)
*RB: 0,1,100.00E-6,1,1,3,0,0,-1 (27)
*RR: 0,0,-5.0000E-9,20.000E-9,1,3,0,0,-1 (27)
*EndTrace

*BeginParam
*IS=100.00E-9 (10.000E-21,.1,0)
*N=40 (.2,45,0)
*RS=20 (1.0000E-6,100,0)
*IKF=0 (0,1.0000E3,0)
*XTI=3 (-100,100,0)
*EG=1.1100 (.1,5.5100,0)
*CJO=1.2500E-12 (10.000E-21,1.0000E-3,0)
*M=.5 (.1,10,0)
*VJ=9.6400 (.3905,10,0)
*FC=.5 (1.0000E-3,10,0)
*ISR=100.00E-12 (10.000E-21,.1,0)
*NR=2 (.5,5,0)
*BV=6.0000E3 (.1,1.0000E6,0)
*IBV=100.00E-6 (1.0000E-9,10,0)
*TT=30.000E-9 (100.00E-18,1.0000E-3,0)
*EndParam

*DEVICE=M50FF3,D

* M50FF3 D model
* updated using Model Editor release 9.0 on 06/20/03 at 14:07
* Model Editor is an OrCAD product.
.MODEL M50FF3 D
+ IS=100.00E-9
+ N=40
+ RS=20
+ CJO=1.2500E-12
+ VJ=9.6400
+ ISR=100.00E-12
+ BV=6.0000E3
+ IBV=100.00E-6
+ TT=30.000E-9
*$
*BeginSpec
*IF:
*JC:
*RL:
*RB: Vz=0 Iz=0 Zz=0
*RR: Trr=0 Ifwd=10.000E-3 Irev=10.000E-3 Rl=100
*EndSpec

*BeginTrace
*IF: 1,0,.4,1.2000,1,3,0,0,-1 (27)
*JC: 0,1,.1,10,1,3,0,0,-1 (27)
*RL: 0,0,1,100,1,3,0,0,-1 (27)
*RB: 0,1,100.00E-6,1,1,3,0,0,-1 (27)
*RR: 0,0,-5.0000E-9,20.000E-9,1,3,0,0,-1 (27)
*EndTrace

*BeginParam
*IS=100.00E-9 (10.000E-21,.1,0)
*N=2.4000 (.2,5,0)
*RS=.3 (1.0000E-6,100,0)
*IKF=0 (0,1.0000E3,0)
*XTI=3 (-100,100,0)
*EG=1.1100 (.1,5.5100,0)
*CJO=2.2200E-12 (10.000E-21,1.0000E-3,0)
*M=.5 (.1,10,0)
*VJ=6.7600 (.3905,10,0)
*FC=.5 (1.0000E-3,10,0)
*ISR=100.00E-12 (10.000E-21,.1,0)
*NR=2 (.5,5,0)
*BV=3.6000E3 (.1,1.0000E6,0)
*IBV=100.00E-6 (1.0000E-9,10,0)
*TT=3.0000E-6 (100.00E-18,1.0000E-3,0)
*EndParam

*DEVICE=M25SG,D

* M25SG D model
* updated using Model Editor release 9.0 on 06/20/03 at 14:07
* Model Editor is an OrCAD product.
.MODEL M25SG D
+ IS=100.00E-9
+ N=2.4000
+ RS=.3
+ CJO=2.2200E-12
+ VJ=6.7600
+ ISR=100.00E-12
+ BV=3.6000E3
+ IBV=100.00E-6
+ TT=3.0000E-6
*$
*BeginSpec
*IF:
*JC:
*RL:
*RB: Vz=0 Iz=0 Zz=0
*RR: Trr=0 Ifwd=10.000E-3 Irev=10.000E-3 Rl=100
*EndSpec

*BeginTrace
*IF: 1,0,.4,1.2000,1,3,0,0,-1 (27)
*JC: 0,1,.1,10,1,3,0,0,-1 (27)
*RL: 0,0,1,100,1,3,0,0,-1 (27)
*RB: 0,1,100.00E-6,1,1,3,0,0,-1 (27)
*RR: 0,0,-5.0000E-9,20.000E-9,1,3,0,0,-1 (27)
*EndTrace

*BeginParam
*IS=100.00E-9 (10.000E-21,.1,0)
*N=4.4000 (.2,5,0)
*RS=13.800 (1.0000E-6,100,0)
*IKF=0 (0,1.0000E3,0)
*XTI=3 (-100,100,0)
*EG=1.1100 (.1,5.5100,0)
*CJO=430.00E-15 (10.000E-21,1.0000E-3,0)
*M=.5 (.1,10,0)
*VJ=19.220 (.3905,20,0)
*FC=.5 (1.0000E-3,10,0)
*ISR=100.00E-12 (10.000E-21,.1,0)
*NR=2 (.5,5,0)
*BV=20.000E3 (.1,1.0000E6,0)
*IBV=100.00E-6 (1.0000E-9,10,0)
*TT=70.000E-9 (100.00E-18,1.0000E-3,0)
*EndParam

*DEVICE=M160UFG,D

* M160UFG D model
* updated using Model Editor release 9.0 on 06/20/03 at 14:09
* Model Editor is an OrCAD product.
.MODEL M160UFG D
+ IS=100.00E-9
+ N=4.4000
+ RS=13.800
+ CJO=430.00E-15
+ VJ=19.220
+ ISR=100.00E-12
+ BV=20.000E3
+ IBV=100.00E-6
+ TT=70.000E-9
*$
*BeginSpec
*IF:
*JC:
*RL:
*RB: Vz=0 Iz=0 Zz=0
*RR: Trr=0 Ifwd=10.000E-3 Irev=10.000E-3 Rl=100
*EndSpec

*BeginTrace
*IF: 1,0,.4,1.2000,1,3,0,0,-1 (27)
*JC: 0,1,.1,10,1,3,0,0,-1 (27)
*RL: 0,0,1,100,1,3,0,0,-1 (27)
*RB: 0,1,100.00E-6,1,1,3,0,0,-1 (27)
*RR: 0,0,-5.0000E-9,20.000E-9,1,3,0,0,-1 (27)
*EndTrace

*BeginParam
*IS=250.00E-9 (10.000E-21,.1,0)
*N=2.3500 (.2,15,0)
*RS=1.5000 (1.0000E-6,100,0)
*IKF=0 (0,1.0000E3,0)
*XTI=3 (-100,100,0)
*EG=1.1100 (.1,5.5100,0)
*CJO=3.8700E-12 (10.000E-21,1.0000E-3,0)
*M=.5 (.1,10,0)
*VJ=6.4100 (.3905,10,0)
*FC=.5 (1.0000E-3,10,0)
*ISR=100.00E-12 (10.000E-21,.1,0)
*NR=2 (.5,5,0)
*BV=6.0000E3 (.1,1.0000E6,0)
*IBV=100.00E-6 (1.0000E-9,10,0)
*TT=3.0000E-6 (100.00E-18,1.0000E-3,0)
*EndParam

*DEVICE=X50SG,D

* X50SG D model
* updated using Model Editor release 9.0 on 06/20/03 at 14:10
* Model Editor is an OrCAD product.
.MODEL X50SG D
+ IS=250.00E-9
+ N=2.3500
+ RS=1.5000
+ CJO=3.8700E-12
+ VJ=6.4100
+ ISR=100.00E-12
+ BV=6.0000E3
+ IBV=100.00E-6
+ TT=3.0000E-6
*$
*BeginSpec
*IF:
*JC:
*RL:
*RB: Vz=0 Iz=0 Zz=0
*RR: Trr=0 Ifwd=10.000E-3 Irev=10.000E-3 Rl=100
*EndSpec

*BeginTrace
*IF: 1,0,.4,1.2000,1,3,0,0,-1 (27)
*JC: 0,1,.1,10,1,3,0,0,-1 (27)
*RL: 0,0,1,100,1,3,0,0,-1 (27)
*RB: 0,1,100.00E-6,1,1,3,0,0,-1 (27)
*RR: 0,0,-5.0000E-9,20.000E-9,1,3,0,0,-1 (27)
*EndTrace

*BeginParam
*IS=250.00E-9 (10.000E-21,.1,0)
*N=38 (.2,15,0)
*RS=2.2000 (1.0000E-6,100,0)
*IKF=0 (0,1.0000E3,0)
*XTI=3 (-100,100,0)
*EG=1.1100 (.1,5.5100,0)
*CJO=3.1000E-12 (10.000E-21,1.0000E-3,0)
*M=.5 (.1,10,0)
*VJ=8.6600 (.3905,10,0)
*FC=.5 (1.0000E-3,10,0)
*ISR=100.00E-12 (10.000E-21,.1,0)
*NR=2 (.5,5,0)
*BV=6.0000E3 (.1,1.0000E6,0)
*IBV=100.00E-6 (1.0000E-9,10,0)
*TT=3.0000E-6 (100.00E-18,1.0000E-3,0)
*EndParam

*DEVICE=X50FF3,D

* X50FF3 D model
* updated using Model Editor release 9.0 on 06/20/03 at 14:12
* Model Editor is an OrCAD product.
.MODEL X50FF3 D
+ IS=250.00E-9
+ N=38
+ RS=2.2000
+ CJO=3.1000E-12
+ VJ=8.6600
+ ISR=100.00E-12
+ BV=6.0000E3
+ IBV=100.00E-6
+ TT=3.0000E-6
*$
*BeginSpec
*IF:
*JC:
*RL:
*RB: Vz=0 Iz=0 Zz=0
*RR: Trr=0 Ifwd=10.000E-3 Irev=10.000E-3 Rl=100
*EndSpec

*BeginTrace
*IF: 1,0,.4,1.2000,1,3,0,0,-1 (27)
*JC: 0,1,.1,10,1,3,0,0,-1 (27)
*RL: 0,0,1,100,1,3,0,0,-1 (27)
*RB: 0,1,100.00E-6,1,1,3,0,0,-1 (27)
*RR: 0,0,-5.0000E-9,20.000E-9,1,3,0,0,-1 (27)
*EndTrace

*BeginParam
*IS=100.00E-9 (10.000E-21,.1,0)
*N=4.2000 (.2,5,0)
*RS=.4 (1.0000E-6,100,0)
*IKF=0 (0,1.0000E3,0)
*XTI=3 (-100,100,0)
*EG=1.1100 (.1,5.5100,0)
*CJO=9.5400E-12 (10.000E-21,1.0000E-3,0)
*M=.5 (.1,10,0)
*VJ=1.2300 (.3905,10,0)
*FC=.5 (1.0000E-3,10,0)
*ISR=100.00E-12 (10.000E-21,.1,0)
*NR=2 (.5,5,0)
*BV=1.1000E3 (.1,1.0000E6,0)
*IBV=100.00E-6 (1.0000E-9,10,0)
*TT=70.000E-9 (100.00E-18,1.0000E-3,0)
*EndParam

*DEVICE=M10UFG,D

* M10UFG D model
* updated using Model Editor release 9.0 on 06/20/03 at 14:12
* Model Editor is an OrCAD product.
.MODEL M10UFG D
+ IS=100.00E-9
+ N=4.2000
+ RS=.4
+ CJO=9.5400E-12
+ VJ=1.2300
+ ISR=100.00E-12
+ BV=1.1000E3
+ IBV=100.00E-6
+ TT=70.000E-9
*$
*BeginSpec
*IF:
*JC:
*RL:
*RB: Vz=0 Iz=0 Zz=0
*RR: Trr=0 Ifwd=10.000E-3 Irev=10.000E-3 Rl=100
*EndSpec

*BeginTrace
*IF: 1,0,.4,1.2000,1,3,0,0,-1 (27)
*JC: 0,1,.1,10,1,3,0,0,-1 (27)
*RL: 0,0,1,100,1,3,0,0,-1 (27)
*RB: 0,1,100.00E-6,1,1,3,0,0,-1 (27)
*RR: 0,0,-5.0000E-9,20.000E-9,1,3,0,0,-1 (27)
*EndTrace

*BeginParam
*IS=100.00E-9 (10.000E-21,.1,0)
*N=70 (.2,75,0)
*RS=30 (1.0000E-6,100,0)
*IKF=0 (0,1.0000E3,0)
*XTI=3 (-100,100,0)
*EG=1.1100 (.1,5.5100,0)
*CJO=660.00E-15 (10.000E-21,1.0000E-3,0)
*M=.5 (.1,10,0)
*VJ=15.520 (.3905,20,0)
*FC=.5 (1.0000E-3,10,0)
*ISR=100.00E-12 (10.000E-21,.1,0)
*NR=2 (.5,5,0)
*BV=12.000E3 (.1,1.0000E6,0)
*IBV=100.00E-6 (1.0000E-9,10,0)
*TT=30.000E-9 (100.00E-18,1.0000E-3,0)
*EndParam

*DEVICE=M100FF3,D

* M100FF3 D model
* updated using Model Editor release 9.0 on 06/20/03 at 14:13
* Model Editor is an OrCAD product.
.MODEL M100FF3 D
+ IS=100.00E-9
+ N=70
+ RS=30
+ CJO=660.00E-15
+ VJ=15.520
+ ISR=100.00E-12
+ BV=12.000E3
+ IBV=100.00E-6
+ TT=30.000E-9
*$
*BeginSpec
*IF:
*JC:
*RL:
*RB: Vz=0 Iz=0 Zz=0
*RR: Trr=0 Ifwd=10.000E-3 Irev=10.000E-3 Rl=100
*EndSpec

*BeginTrace
*IF: 1,0,.4,1.2000,1,3,0,0,-1 (27)
*JC: 0,1,.1,10,1,3,0,0,-1 (27)
*RL: 0,0,1,100,1,3,0,0,-1 (27)
*RB: 0,1,100.00E-6,1,1,3,0,0,-1 (27)
*RR: 0,0,-5.0000E-9,20.000E-9,1,3,0,0,-1 (27)
*EndTrace

*BeginParam
*IS=100.00E-9 (10.000E-21,.1,0)
*N=28.800 (.2,35,0)
*RS=.3 (1.0000E-6,100,0)
*IKF=0 (0,1.0000E3,0)
*XTI=3 (-100,100,0)
*EG=1.1100 (.1,5.5100,0)
*CJO=770.00E-15 (10.000E-21,1.0000E-3,0)
*M=.5 (.1,10,0)
*VJ=15.920 (.3905,20,0)
*FC=.5 (1.0000E-3,10,0)
*ISR=100.00E-12 (10.000E-21,.1,0)
*NR=2 (.5,5,0)
*BV=12.000E3 (.1,1.0000E6,0)
*IBV=100.00E-6 (1.0000E-9,10,0)
*TT=3.0000E-6 (100.00E-18,1.0000E-3,0)
*EndParam

*DEVICE=M100SG,D

* M100SG D model
* updated using Model Editor release 9.0 on 06/20/03 at 14:13
* Model Editor is an OrCAD product.
.MODEL M100SG D
+ IS=100.00E-9
+ N=28.800
+ RS=.3
+ CJO=770.00E-15
+ VJ=15.920
+ ISR=100.00E-12
+ BV=12.000E3
+ IBV=100.00E-6
+ TT=3.0000E-6
*$
*BeginSpec
*IF:
*JC:
*RL:
*RB: Vz=0 Iz=0 Zz=0
*RR: Trr=0 Ifwd=10.000E-3 Irev=10.000E-3 Rl=100
*EndSpec

*BeginTrace
*IF: 1,0,.4,1.2000,1,3,0,0,-1 (27)
*JC: 0,1,.1,10,1,3,0,0,-1 (27)
*RL: 0,0,1,100,1,3,0,0,-1 (27)
*RB: 0,1,100.00E-6,1,1,3,0,0,-1 (27)
*RR: 0,0,-5.0000E-9,20.000E-9,1,3,0,0,-1 (27)
*EndTrace

*BeginParam
*IS=1.0000E-6 (10.000E-21,.1,0)
*N=16 (15,17,0)
*RS=.15 (1.0000E-6,100,0)
*IKF=0 (0,1.0000E3,0)
*XTI=3 (-100,100,0)
*EG=1.1100 (.1,5.5100,0)
*CJO=68.460E-12 (10.000E-21,1.0000E-3,0)
*M=.5 (.1,10,0)
*VJ=4.2700 (4.2700,10,0)
*FC=.5 (1.0000E-3,10,0)
*ISR=100.00E-12 (10.000E-21,.1,0)
*NR=2 (.5,5,0)
*BV=6.0000E3 (.1,1.0000E6,0)
*IBV=100.00E-6 (1.0000E-9,10,0)
*TT=100.00E-9 (100.00E-18,1.0000E-3,0)
*EndParam

*DEVICE=k50uf,D

* k50uf D model
* updated using Model Editor release 9.0 on 06/20/03 at 14:16
* Model Editor is an OrCAD product.
.MODEL k50uf D
+ IS=1.0000E-6
+ N=16
+ RS=.15
+ CJO=68.460E-12
+ VJ=4.2700
+ ISR=100.00E-12
+ BV=6.0000E3
+ IBV=100.00E-6
+ TT=100.00E-9
*$
*BeginSpec
*IF:
*JC:
*RL:
*RB: Vz=0 Iz=0 Zz=0
*RR: Trr=0 Ifwd=10.000E-3 Irev=10.000E-3 Rl=100
*EndSpec

*BeginTrace
*IF: 1,0,.4,1.2000,1,3,0,0,-1 (27)
*JC: 0,1,.1,10,1,3,0,0,-1 (27)
*RL: 0,0,1,100,1,3,0,0,-1 (27)
*RB: 0,1,100.00E-6,1,1,3,0,0,-1 (27)
*RR: 0,0,-5.0000E-9,20.000E-9,1,3,0,0,-1 (27)
*EndTrace

*BeginParam
*IS=1.0000E-6 (10.000E-21,.1,0)
*N=11 (.2,15,0)
*RS=80.000E-3 (1.0000E-6,100,0)
*IKF=0 (0,1.0000E3,0)
*XTI=3 (-100,100,0)
*EG=1.1100 (.1,5.5100,0)
*CJO=102.50E-12 (10.000E-21,1.0000E-3,0)
*M=.5 (.1,10,0)
*VJ=3.2700 (.3905,10,0)
*FC=.5 (1.0000E-3,10,0)
*ISR=100.00E-12 (10.000E-21,.1,0)
*NR=2 (.5,5,0)
*BV=3.6000E3 (.1,1.0000E6,0)
*IBV=100.00E-6 (1.0000E-9,10,0)
*TT=100.00E-9 (100.00E-18,1.0000E-3,0)
*EndParam

*DEVICE=K25UF,D

* K25UF D model
* updated using Model Editor release 9.0 on 06/20/03 at 14:17
* Model Editor is an OrCAD product.
.MODEL K25UF D
+ IS=1.0000E-6
+ N=11
+ RS=80.000E-3
+ CJO=102.50E-12
+ VJ=3.2700
+ ISR=100.00E-12
+ BV=3.6000E3
+ IBV=100.00E-6
+ TT=100.00E-9
*$
*BeginSpec
*IF:
*JC:
*RL:
*RB: Vz=0 Iz=0 Zz=0
*RR: Trr=0 Ifwd=10.000E-3 Irev=10.000E-3 Rl=100
*EndSpec

*BeginTrace
*IF: 1,0,.4,1.2000,1,3,0,0,-1 (27)
*JC: 0,1,.1,10,1,3,0,0,-1 (27)
*RL: 0,0,1,100,1,3,0,0,-1 (27)
*RB: 0,1,100.00E-6,1,1,3,0,0,-1 (27)
*RR: 0,0,-5.0000E-9,20.000E-9,1,3,0,0,-1 (27)
*EndTrace

*BeginParam
*IS=1.0000E-6 (10.000E-21,.1,0)
*N=8.2000 (.2,15,0)
*RS=2.0000E-3 (1.0000E-6,100,0)
*IKF=0 (0,1.0000E3,0)
*XTI=3 (-100,100,0)
*EG=1.1100 (.1,5.5100,0)
*CJO=103.90E-12 (10.000E-21,1.0000E-3,0)
*M=.5 (.1,10,0)
*VJ=3.5100 (.3905,10,0)
*FC=.5 (1.0000E-3,10,0)
*ISR=100.00E-12 (10.000E-21,.1,0)
*NR=2 (.5,5,0)
*BV=3.6000E3 (.1,1.0000E6,0)
*IBV=100.00E-6 (1.0000E-9,10,0)
*TT=3.0000E-6 (100.00E-18,1.0000E-3,0)
*EndParam

*DEVICE=K25S,D

* K25S D model
* updated using Model Editor release 9.0 on 06/20/03 at 14:17
* Model Editor is an OrCAD product.
.MODEL K25S D
+ IS=1.0000E-6
+ N=8.2000
+ RS=2.0000E-3
+ CJO=103.90E-12
+ VJ=3.5100
+ ISR=100.00E-12
+ BV=3.6000E3
+ IBV=100.00E-6
+ TT=3.0000E-6
*$
*BeginSpec
*IF:
*JC:
*RL:
*RB: Vz=0 Iz=0 Zz=0
*RR: Trr=0 Ifwd=10.000E-3 Irev=10.000E-3 Rl=100
*EndSpec

*BeginTrace
*IF: 1,0,.4,1.2000,1,3,0,0,-1 (27)
*JC: 0,1,.1,10,1,3,0,0,-1 (27)
*RL: 0,0,1,100,1,3,0,0,-1 (27)
*RB: 0,1,100.00E-6,1,1,3,0,0,-1 (27)
*RR: 0,0,-5.0000E-9,20.000E-9,1,3,0,0,-1 (27)
*EndTrace

*BeginParam
*IS=1.0000E-6 (10.000E-21,.1,0)
*N=35 (.2,45,0)
*RS=.1 (1.0000E-6,100,0)
*IKF=0 (0,1.0000E3,0)
*XTI=3 (-100,100,0)
*EG=1.1100 (.1,5.5100,0)
*CJO=34.760E-12 (10.000E-21,1.0000E-3,0)
*M=.5 (.1,10,0)
*VJ=8.7500 (.3905,10,0)
*FC=.5 (1.0000E-3,10,0)
*ISR=100.00E-12 (10.000E-21,.1,0)
*NR=2 (.5,5,0)
*BV=12.000E3 (.1,1.0000E6,0)
*IBV=100.00E-6 (1.0000E-9,10,0)
*TT=100.00E-9 (100.00E-18,1.0000E-3,0)
*EndParam

*DEVICE=K100UF,D

* K100UF D model
* updated using Model Editor release 9.0 on 06/20/03 at 14:18
* Model Editor is an OrCAD product.
.MODEL K100UF D
+ IS=1.0000E-6
+ N=35
+ RS=.1
+ CJO=34.760E-12
+ VJ=8.7500
+ ISR=100.00E-12
+ BV=12.000E3
+ IBV=100.00E-6
+ TT=100.00E-9
*$
*BeginSpec
*IF:
*JC:
*RL:
*RB: Vz=0 Iz=0 Zz=0
*RR: Trr=0 Ifwd=10.000E-3 Irev=10.000E-3 Rl=100
*EndSpec

*BeginTrace
*IF: 1,0,.4,1.2000,1,3,0,0,-1 (27)
*JC: 0,1,.1,10,1,3,0,0,-1 (27)
*RL: 0,0,1,100,1,3,0,0,-1 (27)
*RB: 0,1,100.00E-6,1,1,3,0,0,-1 (27)
*RR: 0,0,-5.0000E-9,20.000E-9,1,3,0,0,-1 (27)
*EndTrace

*BeginParam
*IS=500.00E-9 (10.000E-21,.1,0)
*N=52.800 (.2,55,0)
*RS=.36 (1.0000E-6,100,0)
*IKF=0 (0,1.0000E3,0)
*XTI=3 (-100,100,0)
*EG=1.1100 (.1,5.5100,0)
*CJO=17.620E-12 (10.000E-21,1.0000E-3,0)
*M=.5 (.1,10,0)
*VJ=3.2900 (.3905,10,0)
*FC=.5 (1.0000E-3,10,0)
*ISR=100.00E-12 (10.000E-21,.1,0)
*NR=2 (.5,5,0)
*BV=14.400E3 (.1,1.0000E6,0)
*IBV=100.00E-6 (1.0000E-9,10,0)
*TT=70.000E-9 (100.00E-18,1.0000E-3,0)
*EndParam

*DEVICE=FP100F,D

* FP100F D model
* updated using Model Editor release 9.0 on 06/20/03 at 14:19
* Model Editor is an OrCAD product.
.MODEL FP100F D
+ IS=500.00E-9
+ N=52.800
+ RS=.36
+ CJO=17.620E-12
+ VJ=3.2900
+ ISR=100.00E-12
+ BV=14.400E3
+ IBV=100.00E-6
+ TT=70.000E-9
*$
*BeginSpec
*IF:
*JC:
*RL:
*RB: Vz=0 Iz=0 Zz=0
*RR: Trr=0 Ifwd=10.000E-3 Irev=10.000E-3 Rl=100
*EndSpec

*BeginTrace
*IF: 1,0,.4,1.2000,1,3,0,0,-1 (27)
*JC: 0,1,.1,10,1,3,0,0,-1 (27)
*RL: 0,0,1,100,1,3,0,0,-1 (27)
*RB: 0,1,100.00E-6,1,1,3,0,0,-1 (27)
*RR: 0,0,-5.0000E-9,20.000E-9,1,3,0,0,-1 (27)
*EndTrace

*BeginParam
*IS=500.00E-9 (10.000E-21,.1,0)
*N=10 (.2,15,0)
*RS=.3 (1.0000E-6,100,0)
*IKF=0 (0,1.0000E3,0)
*XTI=3 (-100,100,0)
*EG=1.1100 (.1,5.5100,0)
*CJO=78.800E-12 (10.000E-21,1.0000E-3,0)
*M=.5 (.1,10,0)
*VJ=.73 (.3905,10,0)
*FC=.5 (1.0000E-3,10,0)
*ISR=100.00E-12 (10.000E-21,.1,0)
*NR=2 (.5,5,0)
*BV=1.8000E3 (.1,1.0000E6,0)
*IBV=100.00E-6 (1.0000E-9,10,0)
*TT=70.000E-9 (100.00E-18,1.0000E-3,0)
*EndParam

*DEVICE=D90U18R,D

* D90U18R D model
* updated using Model Editor release 9.0 on 06/20/03 at 14:26
* Model Editor is an OrCAD product.
.MODEL D90U18R D
+ IS=500.00E-9
+ N=10
+ RS=.3
+ CJO=78.800E-12
+ VJ=.73
+ ISR=100.00E-12
+ BV=1.8000E3
+ IBV=100.00E-6
+ TT=70.000E-9
*$
*BeginSpec
*IF:
*JC:
*RL:
*RB: Vz=0 Iz=0 Zz=0
*RR: Trr=0 Ifwd=10.000E-3 Irev=10.000E-3 Rl=100
*EndSpec

*BeginTrace
*IF: 1,0,.4,1.2000,1,3,0,0,-1 (27)
*JC: 0,1,.1,10,1,3,0,0,-1 (27)
*RL: 0,0,1,100,1,3,0,0,-1 (27)
*RB: 0,1,100.00E-6,1,1,3,0,0,-1 (27)
*RR: 0,0,-5.0000E-9,20.000E-9,1,3,0,0,-1 (27)
*EndTrace

*BeginParam
*IS=500.00E-9 (10.000E-21,.1,0)
*N=4.3000 (.2,5,0)
*RS=.1 (1.0000E-6,100,0)
*IKF=0 (0,1.0000E3,0)
*XTI=3 (-100,100,0)
*EG=1.1100 (.1,5.5100,0)
*CJO=157.60E-12 (10.000E-21,1.0000E-3,0)
*M=.5 (.1,10,0)
*VJ=.73 (.3905,10,0)
*FC=.5 (1.0000E-3,10,0)
*ISR=100.00E-12 (10.000E-21,.1,0)
*NR=2 (.5,5,0)
*BV=1.1000E3 (.1,1.0000E6,0)
*IBV=100.00E-6 (1.0000E-9,10,0)
*TT=70.000E-9 (100.00E-18,1.0000E-3,0)
*EndParam



*DEVICE=D90FF18R,D

* D90FF18R D model
* created using Parts release 8.0 on 05/22/102 at 11:20
* Parts is a MicroSim product.
.MODEL D90FF18R D
+ IS=5.00E-7
+ N=12
+ RS=.3
+ CJO=78.800E-12
+ VJ=.73
+ ISR=100.00E-12
+ BV=1.8000E3
+ IBV=100.00E-6
+ TT=70.000E-9
*$
*BeginSpec
*IF:
*JC:
*RL:
*RB: Vz=0 Iz=0 Zz=0
*RR: Trr=0 Ifwd=10.000E-3 Irev=10.000E-3 Rl=100
*EndSpec

*BeginTrace
*IF: 1,0,.4,1.2000,1,3,0,0,-1 (27)
*JC: 0,1,.1,10,1,3,0,0,-1 (27)
*RL: 0,0,1,100,1,3,0,0,-1 (27)
*RB: 0,1,100.00E-6,1,1,3,0,0,-1 (27)
*RR: 0,0,-5.0000E-9,20.000E-9,1,3,0,0,-1 (27)
*EndTrace

*BeginParam
*IS=10.000E-15 (10.000E-21,.1,0)
*N=4.3000 (.2,5,0)
*RS=25.000E-3 (1.0000E-6,100,0)
*IKF=0 (0,1.0000E3,0)
*XTI=3 (-100,100,0)
*EG=1.1100 (.1,5.5100,0)
*CJO=85.690E-12 (10.000E-21,1.0000E-3,0)
*M=.5 (.1,10,0)
*VJ=.59 (.3905,10,0)
*FC=.5 (1.0000E-3,10,0)
*ISR=100.00E-12 (10.000E-21,.1,0)
*NR=2 (.5,5,0)
*BV=660 (.1,1.0000E6,0)
*IBV=100.00E-6 (1.0000E-9,10,0)
*TT=30.000E-9 (100.00E-18,1.0000E-3,0)
*EndParam



*DEVICE=D40U18R,D

* D40U18R D model
* created using Parts release 8.0 on 05/22/102 at 11:22
* Parts is a MicroSim product.
.MODEL D40U18R D
+ IS=1.00E-7
+ N=17.600
+ RS=1.6000
+ CJO=4.7700E-12
+ VJ=1.2300
+ ISR=100.00E-12
+ BV=2.2000E3
+ IBV=100.00E-6
+ TT=70.000E-9
*$
*BeginSpec
*IF:
*JC:
*RL:
*RB: Vz=0 Iz=0 Zz=0
*RR: Trr=0 Ifwd=10.000E-3 Irev=10.000E-3 Rl=100
*EndSpec

*BeginTrace
*IF: 1,0,.4,1.2000,1,3,0,0,-1 (27)
*JC: 0,1,.1,10,1,3,0,0,-1 (27)
*RL: 0,0,1,100,1,3,0,0,-1 (27)
*RB: 0,1,100.00E-6,1,1,3,0,0,-1 (27)
*RR: 0,0,-5.0000E-9,20.000E-9,1,3,0,0,-1 (27)
*EndTrace

*BeginParam
*IS=10.000E-15 (10.000E-21,.1,0)
*N=3.2000 (.2,5,0)
*RS=50.000E-3 (1.0000E-6,100,0)
*IKF=0 (0,1.0000E3,0)
*XTI=3 (-100,100,0)
*EG=1.1100 (.1,5.5100,0)
*CJO=164.60E-12 (10.000E-21,1.0000E-3,0)
*M=.5 (.1,10,0)
*VJ=.5 (.3905,10,0)
*FC=.5 (1.0000E-3,10,0)
*ISR=100.00E-12 (10.000E-21,.1,0)
*NR=2 (.5,5,0)
*BV=1.1000E3 (.1,1.0000E6,0)
*IBV=100.00E-6 (1.0000E-9,10,0)
*TT=70.000E-9 (100.00E-18,1.0000E-3,0)
*EndParam

*DEVICE=1N6619,D

* 1N6619 D model
* created using Parts release 8.0 on 05/22/102 at 11:25
* Parts is a MicroSim product.
.MODEL 1N6619 D
+ IS=5.00E-7
+ N=3.2000
+ RS=50.000E-3
+ CJO=164.60E-12
+ VJ=.5
+ ISR=100.00E-12
+ BV=1.1000E3
+ IBV=100.00E-6
+ TT=70.000E-9
*$
*BeginSpec
*IF:
*JC:
*RL:
*RB: Vz=0 Iz=0 Zz=0
*RR: Trr=0 Ifwd=10.000E-3 Irev=10.000E-3 Rl=100
*EndSpec

*BeginTrace
*IF: 1,0,.4,1.2000,1,3,0,0,-1 (27)
*JC: 0,1,.1,10,1,3,0,0,-1 (27)
*RL: 0,0,1,100,1,3,0,0,-1 (27)
*RB: 0,1,100.00E-6,1,1,3,0,0,-1 (27)
*RR: 0,0,-5.0000E-9,20.000E-9,1,3,0,0,-1 (27)
*EndTrace

*BeginParam
*IS=10.000E-15 (10.000E-21,.1,0)
*N=3.4000 (.2,5,0)
*RS=.11 (1.0000E-6,100,0)
*IKF=0 (0,1.0000E3,0)
*XTI=3 (-100,100,0)
*EG=1.1100 (.1,5.5100,0)
*CJO=38.420E-12 (10.000E-21,1.0000E-3,0)
*M=.5 (.1,10,0)
*VJ=.3905 (.3905,10,0)
*FC=.5 (1.0000E-3,10,0)
*ISR=100.00E-12 (10.000E-21,.1,0)
*NR=2 (.5,5,0)
*BV=1.0000E3 (.1,1.0000E6,0)
*IBV=100.00E-6 (1.0000E-9,10,0)
*TT=70.000E-9 (100.00E-18,1.0000E-3,0)
*EndParam

*DEVICE=1N6615,D

* 1N6615 D model
* created using Parts release 8.0 on 05/22/102 at 11:29
* Parts is a MicroSim product.
.MODEL 1N6615 D
+ IS=5.00E-7
+ N=3.4000
+ RS=.11
+ CJO=38.420E-12
+ VJ=.3905
+ ISR=100.00E-12
+ BV=1.1000E3
+ IBV=100.00E-6
+ TT=70.000E-9
*$
*BeginSpec
*IF:
*JC:
*RL:
*RB: Vz=0 Iz=0 Zz=0
*RR: Trr=0 Ifwd=10.000E-3 Irev=10.000E-3 Rl=100
*EndSpec

*BeginTrace
*IF: 1,0,.4,1.2000,1,3,0,0,-1 (27)
*JC: 0,1,.1,10,1,3,0,0,-1 (27)
*RL: 0,0,1,100,1,3,0,0,-1 (27)
*RB: 0,1,100.00E-6,1,1,3,0,0,-1 (27)
*RR: 0,0,-5.0000E-9,20.000E-9,1,3,0,0,-1 (27)
*EndTrace

*BeginParam
*IS=10.000E-15 (10.000E-21,.1,0)
*N=54 (.2,55,0)
*RS=14 (1.0000E-6,100,0)
*IKF=0 (0,1.0000E3,0)
*XTI=3 (-100,100,0)
*EG=1.1100 (.1,5.5100,0)
*CJO=680.00E-15 (10.000E-21,1.0000E-3,0)
*M=.5 (.1,10,0)
*VJ=16.150 (.3905,20,0)
*FC=.5 (1.0000E-3,10,0)
*ISR=100.00E-12 (10.000E-21,.1,0)
*NR=2 (.5,5,0)
*BV=12.000E3 (.1,1.0000E6,0)
*IBV=100.00E-6 (1.0000E-9,10,0)
*TT=70.000E-9 (100.00E-18,1.0000E-3,0)
*EndParam

*DEVICE=1N6535,D

* 1N6535 D model
* created using Parts release 8.0 on 05/22/102 at 11:55
* Parts is a MicroSim product.
.MODEL 1N6535 D
+ IS=1.00E-7
+ N=54
+ RS=14
+ CJO=680.00E-15
+ VJ=16.150
+ ISR=100.00E-12
+ BV=12.000E3
+ IBV=100.00E-6
+ TT=70.000E-9
*$
*BeginSpec
*IF:
*JC:
*RL:
*RB: Vz=0 Iz=0 Zz=0
*RR: Trr=0 Ifwd=10.000E-3 Irev=10.000E-3 Rl=100
*EndSpec

*BeginTrace
*IF: 1,0,.4,1.2000,1,3,0,0,-1 (27)
*JC: 0,1,.1,10,1,3,0,0,-1 (27)
*RL: 0,0,1,100,1,3,0,0,-1 (27)
*RB: 0,1,100.00E-6,1,1,3,0,0,-1 (27)
*RR: 0,0,-5.0000E-9,20.000E-9,1,3,0,0,-1 (27)
*EndTrace

*BeginParam
*IS=10.000E-15 (10.000E-21,.1,0)
*N=1 (.2,5,0)
*RS=3.8000 (1.0000E-6,100,0)
*IKF=0 (0,1.0000E3,0)
*XTI=3 (-100,100,0)
*EG=1.1100 (.1,5.5100,0)
*CJO=1.4400E-12 (10.000E-21,1.0000E-3,0)
*M=.5 (.1,10,0)
*VJ=7.1700 (.3905,10,0)
*FC=.5 (1.0000E-3,10,0)
*ISR=100.00E-12 (10.000E-21,.1,0)
*NR=22.800 (.5,25,0)
*BV=6.0000E3 (.1,1.0000E6,0)
*IBV=100.00E-6 (1.0000E-9,10,0)
*TT=70.000E-9 (100.00E-18,1.0000E-3,0)
*EndParam

*DEVICE=1N6533,D

* 1N6533 D model
* created using Parts release 8.0 on 05/22/102 at 11:56
* Parts is a MicroSim product.
.MODEL 1N6533 D
+ IS=1.00E-7
+ N=22.8
+ RS=3.8000
+ CJO=1.4400E-12
+ VJ=7.1700
+ ISR=100.00E-12
+ NR=22.800
+ BV=6.0000E3
+ IBV=100.00E-6
+ TT=70.000E-9
*$
*BeginSpec
*IF:
*JC:
*RL:
*RB: Vz=0 Iz=0 Zz=0
*RR: Trr=0 Ifwd=10.000E-3 Irev=10.000E-3 Rl=100
*EndSpec

*BeginTrace
*IF: 1,0,.4,1.2000,1,3,0,0,-1 (27)
*JC: 0,1,.1,10,1,3,0,0,-1 (27)
*RL: 0,0,1,100,1,3,0,0,-1 (27)
*RB: 0,1,100.00E-6,1,1,3,0,0,-1 (27)
*RR: 0,0,-5.0000E-9,20.000E-9,1,3,0,0,-1 (27)
*EndTrace

*BeginParam
*IS=10.000E-15 (10.000E-21,.1,0)
*N=4 (.2,5,0)
*RS=1.5000 (1.0000E-6,100,0)
*IKF=0 (0,1.0000E3,0)
*XTI=3 (-100,100,0)
*EG=1.1100 (.1,5.5100,0)
*CJO=1.9200E-12 (10.000E-21,1.0000E-3,0)
*M=.5 (.1,10,0)
*VJ=6.2100 (.3905,10,0)
*FC=.5 (1.0000E-3,10,0)
*ISR=100.00E-12 (10.000E-21,.1,0)
*NR=2 (.5,5,0)
*BV=3.6000E3 (.1,1.0000E6,0)
*IBV=100.00E-6 (1.0000E-9,10,0)
*TT=70.000E-9 (100.00E-18,1.0000E-3,0)
*EndParam

*DEVICE=1N6531,D

* 1N6531 D model
* created using Parts release 8.0 on 05/22/102 at 11:57
* Parts is a MicroSim product.
.MODEL 1N6531 D
+ IS=1.00E-7
+ N=4
+ RS=1.5000
+ CJO=1.9200E-12
+ VJ=6.2100
+ ISR=100.00E-12
+ BV=3.6000E3
+ IBV=100.00E-6
+ TT=70.000E-9
*$
*BeginSpec
*IF:
*JC:
*RL:
*RB: Vz=0 Iz=0 Zz=0
*RR: Trr=0 Ifwd=10.000E-3 Irev=10.000E-3 Rl=100
*EndSpec

*BeginTrace
*IF: 1,0,.4,1.2000,1,3,0,0,-1 (27)
*JC: 0,1,.1,10,1,3,0,0,-1 (27)
*RL: 0,0,1,100,1,3,0,0,-1 (27)
*RB: 0,1,100.00E-6,1,1,3,0,0,-1 (27)
*RR: 0,0,-5.0000E-9,20.000E-9,1,3,0,0,-1 (27)
*EndTrace

*BeginParam
*IS=10.000E-15 (10.000E-21,.1,0)
*N=8.4000 (.2,15,0)
*RS=.8 (1.0000E-6,100,0)
*IKF=0 (0,1.0000E3,0)
*XTI=3 (-100,100,0)
*EG=1.1100 (.1,5.5100,0)
*CJO=4.7700E-12 (10.000E-21,1.0000E-3,0)
*M=.5 (.1,10,0)
*VJ=1.2300 (.3905,10,0)
*FC=.5 (1.0000E-3,10,0)
*ISR=100.00E-12 (10.000E-21,.1,0)
*NR=2 (.5,5,0)
*BV=2.2000E3 (.1,1.0000E6,0)
*IBV=100.00E-6 (1.0000E-9,10,0)
*TT=70.000E-9 (100.00E-18,1.0000E-3,0)
*EndParam

*DEVICE=1N6529,D

* 1N6529 D model
* created using Parts release 8.0 on 05/22/102 at 11:58
* Parts is a MicroSim product.
.MODEL 1N6529 D
+ IS=1.00E-7
+ N=8.4000
+ RS=.8
+ CJO=4.7700E-12
+ VJ=1.2300
+ ISR=100.00E-12
+ BV=2.2000E3
+ IBV=100.00E-6
+ TT=70.000E-9
*$
*BeginSpec
*IF:
*JC:
*RL:
*RB: Vz=0 Iz=0 Zz=0
*RR: Trr=0 Ifwd=10.000E-3 Irev=10.000E-3 Rl=100
*EndSpec

*BeginTrace
*IF: 1,0,.4,1.2000,1,3,0,0,-1 (27)
*JC: 0,1,.1,10,1,3,0,0,-1 (27)
*RL: 0,0,1,100,1,3,0,0,-1 (27)
*RB: 0,1,100.00E-6,1,1,3,0,0,-1 (27)
*RR: 0,0,-5.0000E-9,20.000E-9,1,3,0,0,-1 (27)
*EndTrace

*BeginParam
*IS=250.00E-9 (10.000E-21,.1,0)
*N=38.400 (.2,45,0)
*RS=1.8000 (1.0000E-6,100,0)
*IKF=0 (0,1.0000E3,0)
*XTI=3 (-100,100,0)
*EG=1.1100 (.1,5.5100,0)
*CJO=1.4500E-12 (10.000E-21,1.0000E-3,0)
*M=.5 (.1,10,0)
*VJ=17.060 (.3905,20,0)
*FC=.5 (1.0000E-3,10,0)
*ISR=100.00E-12 (10.000E-21,.1,0)
*NR=2 (.5,5,0)
*BV=12.000E3 (.1,1.0000E6,0)
*IBV=100.00E-6 (1.0000E-9,10,0)
*TT=70.000E-9 (100.00E-18,1.0000E-3,0)
*EndParam

*DEVICE=1N6527,D

* 1N6527 D model
* updated using Model Editor release 9.0 on 06/20/03 at 14:30
* Model Editor is an OrCAD product.
.MODEL 1N6527 D
+ IS=250.00E-9
+ N=38.400
+ RS=1.8000
+ CJO=1.4500E-12
+ VJ=17.060
+ ISR=100.00E-12
+ BV=12.000E3
+ IBV=100.00E-6
+ TT=70.000E-9
*$
*BeginSpec
*IF:
*JC:
*RL:
*RB: Vz=0 Iz=0 Zz=0
*RR: Trr=0 Ifwd=10.000E-3 Irev=10.000E-3 Rl=100
*EndSpec

*BeginTrace
*IF: 1,0,.4,1.2000,1,3,0,0,-1 (27)
*JC: 0,1,.1,10,1,3,0,0,-1 (27)
*RL: 0,0,1,100,1,3,0,0,-1 (27)
*RB: 0,1,100.00E-6,1,1,3,0,0,-1 (27)
*RR: 0,0,-5.0000E-9,20.000E-9,1,3,0,0,-1 (27)
*EndTrace

*BeginParam
*IS=10.000E-15 (10.000E-21,.1,0)
*N=20.400 (.2,25,0)
*RS=.9 (1.0000E-6,100,0)
*IKF=0 (0,1.0000E3,0)
*XTI=3 (-100,100,0)
*EG=1.1100 (.1,5.5100,0)
*CJO=3.1000E-12 (10.000E-21,1.0000E-3,0)
*M=.5 (.1,10,0)
*VJ=6.7300 (.3905,10,0)
*FC=.5 (1.0000E-3,10,0)
*ISR=100.00E-12 (10.000E-21,.1,0)
*NR=2 (.5,5,0)
*BV=6.0000E3 (.1,1.0000E6,0)
*IBV=100.00E-6 (1.0000E-9,10,0)
*TT=70.000E-9 (100.00E-18,1.0000E-3,0)
*EndParam

*DEVICE=1N6525,D

* 1N6525 D model
* created using Parts release 8.0 on 05/22/102 at 12:00
* Parts is a MicroSim product.
.MODEL 1N6525 D
+ IS=2.500E-7
+ N=20.400
+ RS=.9
+ CJO=3.1000E-12
+ VJ=6.7300
+ ISR=100.00E-12
+ BV=6.0000E3
+ IBV=100.00E-6
+ TT=70.000E-9
*$
*BeginSpec
*IF:
*JC:
*RL:
*RB: Vz=0 Iz=0 Zz=0
*RR: Trr=0 Ifwd=10.000E-3 Irev=10.000E-3 Rl=100
*EndSpec

*BeginTrace
*IF: 1,0,.4,1.2000,1,3,0,0,-1 (27)
*JC: 0,1,.1,10,1,3,0,0,-1 (27)
*RL: 0,0,1,100,1,3,0,0,-1 (27)
*RB: 0,1,100.00E-6,1,1,3,0,0,-1 (27)
*RR: 0,0,-5.0000E-9,20.000E-9,1,3,0,0,-1 (27)
*EndTrace

*BeginParam
*IS=10.000E-15 (10.000E-21,.1,0)
*N=16 (.2,25,0)
*RS=.48 (1.0000E-6,100,0)
*IKF=0 (0,1.0000E3,0)
*XTI=3 (-100,100,0)
*EG=1.1100 (.1,5.5100,0)
*CJO=4.7700E-12 (10.000E-21,1.0000E-3,0)
*M=.5 (.1,10,0)
*VJ=3.8100 (.3905,10,0)
*FC=.5 (1.0000E-3,10,0)
*ISR=100.00E-12 (10.000E-21,.1,0)
*NR=2 (.5,5,0)
*BV=3.6000E3 (.1,1.0000E6,0)
*IBV=100.00E-6 (1.0000E-9,10,0)
*TT=70.000E-9 (100.00E-18,1.0000E-3,0)
*EndParam

*DEVICE=1N6523,D

* 1N6523 D model
* created using Parts release 8.0 on 05/22/102 at 12:01
* Parts is a MicroSim product.
.MODEL 1N6523 D
+ IS=2.500E-7
+ N=16
+ RS=.48
+ CJO=4.7700E-12
+ VJ=3.8100
+ ISR=100.00E-12
+ BV=3.6000E3
+ IBV=100.00E-6
+ TT=70.000E-9
*$
*BeginSpec
*IF:
*JC:
*RL:
*RB: Vz=0 Iz=0 Zz=0
*RR: Trr=0 Ifwd=10.000E-3 Irev=10.000E-3 Rl=100
*EndSpec

*BeginTrace
*IF: 1,0,.4,1.2000,1,3,0,0,-1 (27)
*JC: 0,1,.1,10,1,3,0,0,-1 (27)
*RL: 0,0,1,100,1,3,0,0,-1 (27)
*RB: 0,1,100.00E-6,1,1,3,0,0,-1 (27)
*RR: 0,0,-5.0000E-9,20.000E-9,1,3,0,0,-1 (27)
*EndTrace

*BeginParam
*IS=10.000E-15 (10.000E-21,.1,0)
*N=3.5000 (.2,5,0)
*RS=.26 (1.0000E-6,100,0)
*IKF=0 (0,1.0000E3,0)
*XTI=3 (-100,100,0)
*EG=1.1100 (.1,5.5100,0)
*CJO=11.940E-12 (10.000E-21,1.0000E-3,0)
*M=.5 (.1,10,0)
*VJ=1.5700 (.3905,10,0)
*FC=.5 (1.0000E-3,10,0)
*ISR=100.00E-12 (10.000E-21,.1,0)
*NR=2 (.5,5,0)
*BV=2.2000E3 (.1,1.0000E6,0)
*IBV=100.00E-6 (1.0000E-9,10,0)
*TT=70.000E-9 (100.00E-18,1.0000E-3,0)
*EndParam

*DEVICE=1N6521,D

* 1N6521 D model
* created using Parts release 8.0 on 05/22/102 at 12:02
* Parts is a MicroSim product.
.MODEL 1N6521 D
+ IS=2.500E-7
+ N=3.5000
+ RS=.26
+ CJO=11.940E-12
+ VJ=1.5700
+ ISR=100.00E-12
+ BV=2.2000E3
+ IBV=100.00E-6
+ TT=70.000E-9
*$
*BeginSpec
*IF:
*JC:
*RL:
*RB: Vz=0 Iz=0 Zz=0
*RR: Trr=0 Ifwd=10.000E-3 Irev=10.000E-3 Rl=100
*EndSpec

*BeginTrace
*IF: 1,0,.4,1.2000,1,3,0,0,-1 (27)
*JC: 0,1,.1,10,1,3,0,0,-1 (27)
*RL: 0,0,1,100,1,3,0,0,-1 (27)
*RB: 0,1,100.00E-6,1,1,3,0,0,-1 (27)
*RR: 0,0,-5.0000E-9,20.000E-9,1,3,0,0,-1 (27)
*EndTrace

*BeginParam
*IS=10.000E-15 (10.000E-21,.1,0)
*N=3 (.2,5,0)
*RS=.68 (1.0000E-6,100,0)
*IKF=0 (0,1.0000E3,0)
*XTI=3 (-100,100,0)
*EG=1.1100 (.1,5.5100,0)
*CJO=8.8700E-12 (10.000E-21,1.0000E-3,0)
*M=.5 (.1,10,0)
*VJ=14.030 (.3905,20,0)
*FC=.5 (1.0000E-3,10,0)
*ISR=100.00E-12 (10.000E-21,.1,0)
*NR=2 (.5,5,0)
*BV=12.000E3 (.1,1.0000E6,0)
*IBV=100.00E-6 (1.0000E-9,10,0)
*TT=70.000E-9 (100.00E-18,1.0000E-3,0)
*EndParam

*DEVICE=1N6519,D

* 1N6519 D model
* created using Parts release 8.0 on 05/22/102 at 12:03
* Parts is a MicroSim product.
.MODEL 1N6519 D
+ IS=5.00E-7
+ N=3
+ RS=.68
+ CJO=8.8700E-12
+ VJ=14.030
+ ISR=100.00E-12
+ BV=12.000E3
+ IBV=100.00E-6
+ TT=70.000E-9
*$
*BeginSpec
*IF:
*JC:
*RL:
*RB: Vz=0 Iz=0 Zz=0
*RR: Trr=0 Ifwd=10.000E-3 Irev=10.000E-3 Rl=100
*EndSpec

*BeginTrace
*IF: 1,0,.4,1.2000,1,3,0,0,-1 (27)
*JC: 0,1,.1,10,1,3,0,0,-1 (27)
*RL: 0,0,1,100,1,3,0,0,-1 (27)
*RB: 0,1,100.00E-6,1,1,3,0,0,-1 (27)
*RR: 0,0,-5.0000E-9,20.000E-9,1,3,0,0,-1 (27)
*EndTrace

*BeginParam
*IS=10.000E-15 (10.000E-21,.1,0)
*N=19.200 (.2,25,0)
*RS=.36 (1.0000E-6,100,0)
*IKF=0 (0,1.0000E3,0)
*XTI=3 (-100,100,0)
*EG=1.1100 (.1,5.5100,0)
*CJO=22.760E-12 (10.000E-21,1.0000E-3,0)
*M=.5 (.1,10,0)
*VJ=6.4100 (.3905,10,0)
*FC=.5 (1.0000E-3,10,0)
*ISR=100.00E-12 (10.000E-21,.1,0)
*NR=2 (.5,5,0)
*BV=6.0000E3 (.1,1.0000E6,0)
*IBV=100.00E-6 (1.0000E-9,10,0)
*TT=70.000E-9 (100.00E-18,1.0000E-3,0)
*EndParam

*DEVICE=1N6517,D

* 1N6517 D model
* created using Parts release 8.0 on 05/22/102 at 12:04
* Parts is a MicroSim product.
.MODEL 1N6517 D
+ IS=5.00E-7
+ N=19.200
+ RS=.36
+ CJO=22.760E-12
+ VJ=6.4100
+ ISR=100.00E-12
+ BV=6.0000E3
+ IBV=100.00E-6
+ TT=70.000E-9
*$
*BeginSpec
*IF:
*JC:
*RL:
*RB: Vz=0 Iz=0 Zz=0
*RR: Trr=0 Ifwd=10.000E-3 Irev=10.000E-3 Rl=100
*EndSpec

*BeginTrace
*IF: 1,0,.4,1.2000,1,3,0,0,-1 (27)
*JC: 0,1,.1,10,1,3,0,0,-1 (27)
*RL: 0,0,1,100,1,3,0,0,-1 (27)
*RB: 0,1,100.00E-6,1,1,3,0,0,-1 (27)
*RR: 0,0,-5.0000E-9,20.000E-9,1,3,0,0,-1 (27)
*EndTrace

*BeginParam
*IS=10.000E-15 (10.000E-21,.1,0)
*N=3.3000 (.2,5,0)
*RS=.18 (1.0000E-6,100,0)
*IKF=0 (0,1.0000E3,0)
*XTI=3 (-100,100,0)
*EG=1.1100 (.1,5.5100,0)
*CJO=35.240E-12 (10.000E-21,1.0000E-3,0)
*M=.5 (.1,10,0)
*VJ=3.2900 (.3905,10,0)
*FC=.5 (1.0000E-3,10,0)
*ISR=100.00E-12 (10.000E-21,.1,0)
*NR=2 (.5,5,0)
*BV=3.6000E3 (.1,1.0000E6,0)
*IBV=100.00E-6 (1.0000E-9,10,0)
*TT=70.000E-9 (100.00E-18,1.0000E-3,0)
*EndParam

*DEVICE=1N6515,D

* 1N6515 D model
* created using Parts release 8.0 on 05/22/102 at 12:05
* Parts is a MicroSim product.
.MODEL 1N6515 D
+ IS=5.00E-7
+ N=3.3000
+ RS=.18
+ CJO=35.240E-12
+ VJ=3.2900
+ ISR=100.00E-12
+ BV=3.6000E3
+ IBV=100.00E-6
+ TT=70.000E-9
*$
*BeginSpec
*IF:
*JC:
*RL:
*RB: Vz=0 Iz=0 Zz=0
*RR: Trr=0 Ifwd=10.000E-3 Irev=10.000E-3 Rl=100
*EndSpec

*BeginTrace
*IF: 1,0,.4,1.2000,1,3,0,0,-1 (27)
*JC: 0,1,.1,10,1,3,0,0,-1 (27)
*RL: 0,0,1,100,1,3,0,0,-1 (27)
*RB: 0,1,100.00E-6,1,1,3,0,0,-1 (27)
*RR: 0,0,-5.0000E-9,20.000E-9,1,3,0,0,-1 (27)
*EndTrace

*BeginParam
*IS=10.000E-15 (10.000E-21,.1,0)
*N=7.2000 (.2,15,0)
*RS=.14 (1.0000E-6,100,0)
*IKF=0 (0,1.0000E3,0)
*XTI=3 (-100,100,0)
*EG=1.1100 (.1,5.5100,0)
*CJO=56.640E-12 (10.000E-21,1.0000E-3,0)
*M=.5 (.1,10,0)
*VJ=1.6700 (.3905,10,0)
*FC=.5 (1.0000E-3,10,0)
*ISR=100.00E-12 (10.000E-21,.1,0)
*NR=2 (.5,5,0)
*BV=2.2000E3 (.1,1.0000E6,0)
*IBV=100.00E-6 (1.0000E-9,10,0)
*TT=70.000E-9 (100.00E-18,1.0000E-3,0)
*EndParam

*DEVICE=1N6513,D

* 1N6513 D model
* created using Parts release 8.0 on 05/22/102 at 12:06
* Parts is a MicroSim product.
.MODEL 1N6513 D
+ IS=5.00E-7
+ N=7.2000
+ RS=.14
+ CJO=56.640E-12
+ VJ=1.6700
+ ISR=100.00E-12
+ BV=2.2000E3
+ IBV=100.00E-6
+ TT=70.000E-9
*$
*BeginSpec
*IF:
*JC:
*RL:
*RB: Vz=0 Iz=0 Zz=0
*RR: Trr=0 Ifwd=10.000E-3 Irev=10.000E-3 Rl=100
*EndSpec

*BeginTrace
*IF: 1,0,.4,1.2000,1,3,0,0,-1 (27)
*JC: 0,1,.1,10,1,3,0,0,-1 (27)
*RL: 0,0,1,100,1,3,0,0,-1 (27)
*RB: 0,1,100.00E-6,1,1,3,0,0,-1 (27)
*RR: 0,0,-5.0000E-9,20.000E-9,1,3,0,0,-1 (27)
*EndTrace

*BeginParam
*IS=10.000E-15 (10.000E-21,.1,0)
*N=2.2500 (.2,5,0)
*RS=45.000E-3 (1.0000E-6,100,0)
*IKF=0 (0,1.0000E3,0)
*XTI=3 (-100,100,0)
*EG=1.1100 (.1,5.5100,0)
*CJO=44.100E-12 (10.000E-21,1.0000E-3,0)
*M=.5 (.1,10,0)
*VJ=.97 (.3905,10,0)
*FC=.5 (1.0000E-3,10,0)
*ISR=100.00E-12 (10.000E-21,.1,0)
*NR=2 (.5,5,0)
*BV=1.1000E3 (.1,1.0000E6,0)
*IBV=100.00E-6 (1.0000E-9,10,0)
*TT=2.0000E-6 (100.00E-18,1.0000E-3,0)
*EndParam

*DEVICE=1N5622,D

* 1N5622 D model
* created using Parts release 8.0 on 05/22/102 at 12:07
* Parts is a MicroSim product.
.MODEL 1N5622 D
+ IS=5.00E-7
+ N=2.2500
+ RS=45.000E-3
+ CJO=44.100E-12
+ VJ=.97
+ ISR=100.00E-12
+ BV=1.1000E3
+ IBV=100.00E-6
+ TT=2.0000E-6
*$
*BeginSpec
*IF:
*JC:
*RL:
*RB: Vz=0 Iz=0 Zz=0
*RR: Trr=0 Ifwd=10.000E-3 Irev=10.000E-3 Rl=100
*EndSpec

*BeginTrace
*IF: 1,0,.4,1.2000,1,3,0,0,-1 (27)
*JC: 0,1,.1,10,1,3,0,0,-1 (27)
*RL: 0,0,1,100,1,3,0,0,-1 (27)
*RB: 0,1,100.00E-6,1,1,3,0,0,-1 (27)
*RR: 0,0,-5.0000E-9,20.000E-9,1,3,0,0,-1 (27)
*EndTrace

*BeginParam
*IS=500.00E-9 (10.000E-21,.1,0)
*N=2.1000 (.2,5,0)
*RS=10.000E-3 (1.0000E-6,100,0)
*IKF=0 (0,1.0000E3,0)
*XTI=3 (-100,100,0)
*EG=1.1100 (.1,5.5100,0)
*CJO=122.20E-12 (10.000E-21,1.0000E-3,0)
*M=.5 (.1,10,0)
*VJ=.8 (.3905,10,0)
*FC=.5 (1.0000E-3,10,0)
*ISR=100.00E-12 (10.000E-21,.1,0)
*NR=2 (.5,5,0)
*BV=880 (.1,1.0000E6,0)
*IBV=100.00E-6 (1.0000E-9,10,0)
*TT=500.00E-9 (100.00E-18,1.0000E-3,0)
*EndParam

*DEVICE=1N5554,D

* 1N5554 D model
* updated using Model Editor release 9.0 on 06/20/03 at 14:30
* Model Editor is an OrCAD product.
.MODEL 1N5554 D
+ IS=500.00E-9
+ N=2.1000
+ RS=10.000E-3
+ CJO=122.20E-12
+ VJ=.8
+ ISR=100.00E-12
+ BV=880
+ IBV=100.00E-6
+ TT=500.00E-9
*$
*BeginSpec
*IF:
*JC:
*RL:
*RB: Vz=0 Iz=0 Zz=0
*RR: Trr=0 Ifwd=10.000E-3 Irev=10.000E-3 Rl=100
*EndSpec

*BeginTrace
*IF: 1,0,.4,1.2000,1,3,0,0,-1 (27)
*JC: 0,1,.1,10,1,3,0,0,-1 (27)
*RL: 0,0,1,100,1,3,0,0,-1 (27)
*RB: 0,1,100.00E-6,1,1,3,0,0,-1 (27)
*RR: 0,0,-5.0000E-9,20.000E-9,1,3,0,0,-1 (27)
*EndTrace

*BeginParam
*IS=10.000E-15 (10.000E-21,.1,0)
*N=2.1000 (.2,5,0)
*RS=10.000E-3 (1.0000E-6,100,0)
*IKF=0 (0,1.0000E3,0)
*XTI=3 (-100,100,0)
*EG=1.1100 (.1,5.5100,0)
*CJO=122.20E-12 (10.000E-21,1.0000E-3,0)
*M=.5 (.1,10,0)
*VJ=.8 (.3905,10,0)
*FC=.5 (1.0000E-3,10,0)
*ISR=100.00E-12 (10.000E-21,.1,0)
*NR=2 (.5,5,0)
*BV=880 (.1,1.0000E6,0)
*IBV=100.00E-6 (1.0000E-9,10,0)
*TT=500.00E-9 (100.00E-18,1.0000E-3,0)
*EndParam

*DEVICE=1N5552,D

* 1N5552 D model
* created using Parts release 8.0 on 05/22/102 at 12:09
* Parts is a MicroSim product.
.MODEL 1N5552 D
+ IS=5.00E-7
+ N=2.1000
+ RS=10.000E-3
+ CJO=122.20E-12
+ VJ=.8
+ ISR=100.00E-12
+ BV=880
+ IBV=100.00E-6
+ TT=500.00E-9
*$
*BeginSpec
*IF:
*JC:
*RL:
*RB: Vz=0 Iz=0 Zz=0
*RR: Trr=0 Ifwd=10.000E-3 Irev=10.000E-3 Rl=100
*EndSpec

*BeginTrace
*IF: 1,0,.4,1.2000,1,3,0,0,-1 (27)
*JC: 0,1,.1,10,1,3,0,0,-1 (27)
*RL: 0,0,1,100,1,3,0,0,-1 (27)
*RB: 0,1,100.00E-6,1,1,3,0,0,-1 (27)
*RR: 0,0,-5.0000E-9,20.000E-9,1,3,0,0,-1 (27)
*EndTrace

*BeginParam
*IS=10.000E-15 (10.000E-21,.1,0)
*N=2.1000 (.2,5,0)
*RS=25.000E-3 (1.0000E-6,100,0)
*IKF=0 (0,1.0000E3,0)
*XTI=3 (-100,100,0)
*EG=1.1100 (.1,5.5100,0)
*CJO=136.10E-12 (10.000E-21,1.0000E-3,0)
*M=.5 (.1,10,0)
*VJ=.79 (.3905,10,0)
*FC=.5 (1.0000E-3,10,0)
*ISR=100.00E-12 (10.000E-21,.1,0)
*NR=2 (.5,5,0)
*BV=660 (.1,1.0000E6,0)
*IBV=100.00E-6 (1.0000E-9,10,0)
*TT=400.00E-9 (100.00E-18,1.0000E-3,0)
*EndParam

*DEVICE=1N5420,D

* 1N5420 D model
* created using Parts release 8.0 on 05/22/102 at 12:10
* Parts is a MicroSim product.
.MODEL 1N5420 D
+ IS=5.00E-7
+ N=2.1000
+ RS=25.000E-3
+ CJO=136.10E-12
+ VJ=.79
+ ISR=100.00E-12
+ BV=660
+ IBV=100.00E-6
+ TT=400.00E-9
*$